Publications

Papers

Books

Papers

2024

  1. Archer de Carvalho, T., Gaspar, F., Marques, A.C., Mateus, A. (2024). Optimization of formulation ratios of geopolymer mortar based on metakaolin and biomass fly ash. Construction and Building Materials, 412, 134846.
    (https://doi.org/10.1016/j.conbuildmat.2023.134846)
  2. Augusto, Ana, Marques, Sónia, Félix, Rafael, R., Dias, Juliana, Dias J., Alves N., Shiels, Katie, Murray, Patrick, Novais, Sara C., Lemos, Marco F.L., Silva, S. F. (2024). A Novel Seaweed-Based Biodegradable and Active Food Film to Reduce Freezer Burn in Frozen Salmon. Food Hydrocolloids, 110332.
    (https://doi.org/10.1016/j.foodhyd.2024.110332)
  3.  Conceição, Pedro, Portugal, Jaime, Franco, Margarida, Alves, Nuno M., Marques, Duarte, Neves, Cristina B. (2024). Comparison between digital superimposition and microcomputed tomography methods of fit assessment of removable partial denture frameworks. Journal of Prosthetic Dentistry, 131(3), pp. 479–486.
    (https://doi.org/10.1016/j.prosdent.2023.02.002)
  4. Costa, A. A., Gameiro, F., Massano, A. P., Arioli, M., Silva, D. P., Carreira, P., Martínez, J. C., Matias, J., Martinho, P. G., Mateus, A., Mitchell, R. M. (2024). Industrially relevant injection moulding apparatus for in situ time-resolving small-angle X-ray scattering measurements. The International Journal of Advanced Manufacturing Technology 132, pp. 4737-4752, 13651-3.
    (https://doi.org/10.1007/s00170-024-13651-3)
  5. Daruari, H., Peixinho, A., Gaspar, F., Mendonca, P. (2024). Transforming maritime and industrial waste into sustainable building insulation materials: circular economy. Sustainable Mediterranean Construction, 2024(19), pp. 70–78.
  6. de Jesus, J., Ferreira, J.A.M., Capela, C., da Costa, J.D.M., Borrego, L. (2024). Physical Simulation of Mold Steels Repaired by Laser Beam Fusion Deposition. Metals, 14(6), 663.
    (https://doi.org/10.3390/met14060663)
  7. Encarnação, T., Nicolau, N., Ramos, P., Fausto, R., Sobral, A.J.F.N. (2024). Recycling Ophthalmic Lens Wastewater in a Circular Economy Context: A Case Study with Microalgae Integration. Materials, 17(1), 75.
    (https://doi.org/10.3390/ma17010075)
  8. Ferreira, C. A., Guerreiro, S. F., Padrão, T., Alves, N. M., & Dias, J. R. (2024). Antimicrobial Nanofibers to Fight Multidrug-Resistant Bacteria. In Nanotechnology Based Strategies for Combating Antimicrobial Resistance (pp. 533-579). Singapore: Springer Nature Singapore.
    (https://doi.org/10.1007/978-981-97-2023-1_20)
  9. Marciniak, Z., Branco, R., Macek, W., Dobrzyński, M., Malça, C. (2024). Cyclic deformation and fracture behaviour of additive manufactured maraging steel under variable-amplitude loading. Theoretical and Applied Fracture Mechanics, 129, 104207.
    (https://doi.org/10.1016/j.tafmec.2023.104207)
  10. Martins-Ferreira, N., Perdigão, R.A.P. (2024). Towards a Generalized Cayley–Dickson Construction through Involutive Dimagmas. Mathematics, 12(7), 996.
    (https://doi.org/10.3390/math12070996)
  11. Pedrosa, A., Gaspar, F. (2024). Rheology Assessment of Mortar Materials for Additive Manufacturing. Current Materials Science, 17(4), pp. 304–320.
    (https://doi.org/10.2174/2666145417666230801093723)
  12. Pereira, D., Alves, N., Sousa, Â., Valente, J.F.A. (2024). Metal-based approaches to fight cervical cancer. Drug Discovery Today, 29(8), 104073.
    (https://doi.org/10.1016/j.drudis.2024.104073)
  13. Pereira, D., Ferreira, S., Ramírez-Rodríguez, G.B., Alves, N., Sousa, Â., Valente, J.F.A. (2024). Silver and Antimicrobial Polymer Nanocomplexes to Enhance Biocidal Effects. International Journal of Molecular Sciences, 25(2), 1256.
    (https://doi.org/10.3390/ijms25021256)
  14. Pereira M. R., Silva G., Semiao V., Martins J., Silverio V., Pascoal‐Faria P., Duarte I., Alves N, Ginjeira A. (2024). Syringe irrigation in confluent canals: A sequential computational fluid dynamics assessment. Australian Endodontic Journal 50 (1), 40-51.
    (https://doi.org/10.1111/aej.12805)
  15. Reis, Tiago, Barbosa, Cláudia, Franco, Margarida, Silva, Ruben, Alves, Nuno, Castelo-Baz, Pablo, Martín-Cruces, Jose, Martín-Biedma, Benjamín (2024). Three-Dimensional Printed Teeth in Endodontics: A New Protocol for Microcomputed Tomography Studies. Materials, 17(8), 1899.
    (https://doi.org/10.3390/ma17081899)
  16. Silva, João C., Meneses, João, Meneses J., Garrudo, Fábio F. F., Fernandes, Sofia R. Alves, Nuno, Ferreira, Frederico Castelo, Pascoal-Faria, Paula (2024). Direct coupled electrical stimulation towards improved osteogenic differentiation of human mesenchymal stem/stromal cells: a comparative study of different protocols. Scientific Reports, 14, 5458.
    (https://doi.org/10.1038/s41598-024-55234-y)
  17. Silva B., João F., Amado S., Alvites R., Maurício C. A., Esteves B., Sousa C. A., Lopes B., Sousa P., Dias R. J., Veloso A., Pascoal-Faria P., Alves N. (2024), Biomechanical gait analysis in sheep: kinematic parameters. Frontiers in Bioengineering and Biotechnology 12, 1370101.
    (https://doi.org/10.3389/fbioe.2024.1370101)
  18. Silva, J. C., Marcelino, P., Meneses, J., Barbosa, F., Moura, C. S., Marques, A. C., Cabral, J. M. S., Pascoal-Faria, P., Alves, N., Morgado, J., Ferreira, F. C., Garrudo, F. F. F. (2024). Synergy between 3D-extruded electroconductive scaffolds and electrical stimulation to improve bone tissue engineering strategies. In Journal of Materials Chemistry B (Vol. 12, Issue 11, pp. 2771–2794). Royal Society of Chemistry (RSC).
    (https://doi.org/10.1039/d3tb02673f)
  19. Silva, Rui, Silva, Bruna, Fernandes, Cristiana, Morouço, Pedro, Alves, Nuno, Veloso, António (2024). A Review on 3D Scanners Studies for Producing Customized Orthoses. Sensors, 24(5), 1373.
    (https://doi.org/10.3390/s24051373)
  20. Silva, Rui, Morouço, Pedro, Lains, Jorge, Amorim, Paula, Alves, Nuno, Veloso, António Prieto (2024). Innovative Design and Development of Personalized Ankle-Foot Orthoses for Survivors of Stroke With Equinovarus Foot: Protocol for a Feasibility and Comparative Trial. JMIR Research Protocols, 13(1), e52365.
    (https://doi.org/10.2196/52365)
  21. Sousa, Helena Cardoso, Ruben, Rui B., Viana, Júlio C. (2024). On the Fused Deposition Modelling of Personalised Bio-Scaffolds: Materials, Design, and Manufacturing Aspects. Bioengineering, 11, 769.
    (https://doi.org/10.3390/bioengineering11080769)
  22. Veiga, A., Silva, I. V., Dias, J. R., Alves, N. M., Oliveira, A. L., & Ribeiro, V. P. (2024). Streamlining Skin Regeneration: A Ready-To-Use Silk Bilayer Wound Dressing. Gels, 10(7), 439.
    (https://doi.org/10.3390/gels10070439)
Watch video

2023

  1. Arioli, M., Massano, A.P., da Silva, D.P., Gameiro, F.A., Carreira, P., Malfois, M., Matias, J., Pascoal-Faria, P., Mateus, A., Mitchell, G.R. (2023). Time and Spatially Resolved Operando Small Angle X-ray Scattering Measurements during Injection Moulding of Plastics. Journal of Manufacturing and Materials Processing, MDPI, 7, 176.
    (https://doi.org/10.3390/jmmp/7050176)

  2. Bernardes, B. G., Baptista-Silva, S., Illanes-Bordomás, C., Magalhães, R., Dias, J. R., Alves, N. M., Costa, R., García-González, C.A., Oliveira, A. L. (2023). Expanding the Potential of Self-Assembled Silk Fibroin as Aerogel Particles for Tissue Regeneration. Pharmaceutics, MDPI, 15, 11, 2605.
    (https://doi.org/10.3390/pharmaceutics15112605)

  3. Bernardes, R., Parola, V., Cardoso, R., Neves, H., Cruz, A., Xavier, W., Durães, R., Malça, C. (2023). Optimization Process of an Innovative Rehabilitation Device based on Pre-Clinical Results. WSEAS Transactions on Information Science and Applications, 20, 146-153.
    (https://doi.org/10.37394/23209.2023.20.17)

  4. Bettencourt, A.F., Costa, J., Ribeiro, I.A.C., Gonçalves, L., Arias-Moliz, M.T., Dias, J.R., Franco, M., Alves, N.M., Portugal, J., Neves, C.B. (2023). Development of a Chlorhexidine Delivery System Based on Dental Acrylic Reline Resins. International Journal of Pharmaceutics, Elsevier, 631, 122470.
    (https://doi.org/10.1016/j.ijpharm.2022.122470)

  5. Camacho, J., Martins, R.F., Branco, R., Raimundo, A., Malça, C. (2023). The influence of printing strategies on fatigue crack growth behavior of an additively manufactured AISI 316L stainless steel. Fatigue and Fracture of Engineering Materials and Structures, 46, 10, 3953–3965.
    (https://doi.org/10.1111/ffe.14112)

  6. Chauhan, A., Patel, M.K., Chaudar, S., Nayak, M.K., Saini, S.S., Mitchell, G. (2023). Efficacy evaluation of an air assisted electrostatic disinfection device for the effective disinfection and sanitization against the spread of pathogenic infections. Journal of Electrostatics, Elsevier, 123, 103807.
    (https://doi.org/10.1016/j.elstat.2023.103807)

  7. Conceição, P., Portugal, J., Franco, M., Alves, N.M., Marques, D., Neves, C.B. (2023). Comparison between digital superimposition and microcomputed tomography methods of fit assessment of removable partial denture frameworks. The Journal of Prosthetic Dentistry, Elsevier.
    (https://doi.org/10.1016/j.prosdent.2023.02.002)

  8. Costa, A., Encarnação, T., Tavares, R., Bom, T.T., Mateus, A. (2023). Bioplastics: Innovation for Green Transition. Polymers, MDPI, 15, 517.
    (https://doi.org/10.3390/polym15030517)

  9. Costa, A.A., Martinho, P.G., Barreiros, F.M. (2023). Comparison between the Mechanical Recycling Behaviour of Amorphous and Semicrystalline Polymers: A Case Study. Recycling, MDPI, 8, 1, 12.
    (https://doi.org/10.3390/recycling8010012)

  10. Cordeiro, R., Alvites, R.D, Sousa, A.C., Lopes, B., Sousa, P., Mauricio, A.C., Alves, N., Moura, C. (2023). Cellulose-Based Scaffolds: A Comparative Study for Potential Application in Articular Cartilage. Polymers, MDPI, 15, 3, 781.
    (https://doi.org/10.3390/polym15030781)

  11. Cordeiro, R., Meneses, J., Pascoal-Faria, P., Moura, C., Alves, N. (2023). Eco-friendly flagging tape. World Review of Science, Technology and Sustainable Development, InderScience Enterprises Ltd., 19, 4, 301-313.
    (https://doi.org/10.1504/WRSTSD.2023.133886)

  12. da Silva, A., Gaspar, F., Bakatovich, A. (2023). Composite Materials of Rice Husk and Reed Fibers for Thermal Insulation Plates Using Sodium Silicate as a Binder. Sustainability, MDPI, 15, 11, 1273.
    (https://doi.org/10.3390/su151411273)

  13. da Silva, D.P., Pinheiro, J., Abdulghani, S., Kamma-Lorger, C., Martínez J. C., Solano, E., Mateus, A., Pascoal-Faria, P.C., Mitchell, G.R. (2023). Property mapping of LDPE during 3D printing: evaluating morphological development with X-ray scattering. Frontiers in Mechanical Engineering, 9.
    (https://doi.org/10.3389/fmech.2023.1232562)

  14. de Lima, T., de Lima, G.G., Munir, N., Coutinho, J., Mitchell, G. (2023). Nanofibrillated cellulose originated from Rhododendron ponticum to produce scaffolds using 3D printing for biomedical applications. International Journal of Biological Macromolecules, Elsevier, 253, 126556.
    (https://doi.org/10.1016/j.ijbiomac.2023.126556)

  15. de Carvalho, T.A., Gaspar, F., Marques A.C., Mateus, A. (2023). Evaluation of the Potential of Metakaolin, Electric Arc Furnace Slag, and Biomass Fly Ash for Geopolymer Cement Compositions. Materials, MDPI, 16, 7, 2741.
    (https://doi.org/10.3390/ma16072741)

  16. Encarnação, T., Nicolau, N., Ramos, P., Silvestre, E., Mateus, A., de Carvalho, T. A., Gaspar, F., Massano, A., Biscaia, S., Castro, R. A. E., Nogueira, B. A., Singh, P, Pacheco, D., Patrício, T., Fausto, R., Sobral, A.J.F.N. (2023). Recycling Ophthalmic Lens Wastewater in a Circular Economy Context: A Case Study with Microalgae Integration. Materials, MDPI, 17, 1, 75.
    (https://doi.org/10.3390/ma17010075)

  17. Gil, J., Moura, C. S., Silverio, V., Gonçalves, G., Santos, H. (2023). Cancer models on chip: paving the way to large scale trial applications. Advanced Materials, 35(35), 2300692.
    (https://doi.org/10.1002/adma.202300692)

  18. Guillen, A., Abbott, C.C., Deng, Z.D., Huang, Y., Pascoal-Faria, P., Truong, D.Q., Datta, A. (2023). Impact of modelled field of view in electroconvulsive therapy current flow simulations. Frontiers in Psychiatry, 14, 1168672.
    (https://doi.org/10.3389/fpsyt.2023.1168672)

  19. Lamolinara, B., Teixeira, M. S., Galamba Marreiros, C., Ferreira, V. H. S. (2023). Sustainable vs circular business models in agribusiness: a comparative bibliometric analysis. Revista de Economia e Sociologia Rural, Sociedade Brasileira de Economia e Sociologia Rural, 61, Special.
    (https://doi.org/10.1590/1806-9479.2023.275416)

  20. Manuell, G., Martins-Ferreira, N. (2023). Weakly Schreier extensions for general algebras. Algebra Universalis, 84, 3, 22.
    (https://doi.org/10.1007/s00012-023-00823-7)

  21. Marcelino, P., Silva, J.C., Moura, C.S., Meneses, J., Cordeiro, R., Alves, N., Pascoal-Faria, P., Ferreira, F.C. (2023). A Novel Approach for Design and Manufacturing of Curvature-Featuring Scaffolds for Osteochondral Repair. Polymers, MDPI, 15, 2129.
    (https://doi.org/10.3390/polym15092129)

  22. Martins-Ferreira, N. (2023). Pointed Semibiproducts of Monoids. Theory and Applications of Categories, 39, 6, 172–185.
    (http://www.tac.mta.ca/tac/volumes/39/6/39-06.pdf)

  23. Martins-Ferreira, N. (2023). Internal Categorical Structures and Their Applications. Mathematics, 11, 3, 660.
    (https://doi.org/10.3390/math11030660)

  24. Martins-Ferreira, N. (2023). On the Structure of an Internal Groupoid. Applied Categorical Structures, 31, 5, 39.
    (https://doi.org/10.1007/s10485-023-09740-1)

  25. Martins-Ferreira, N., Sobral, M. (2023). Normality for monoid monomorphisms. Indagationes Mathematicae, 34, ser. A, 1207–1222.
    (https://doi.org/10.1016/j.indag.2023.03.007)

  26. Meneses, J., Fernandes, S.R., Silva, J.C., Ferreira, F.C., Alves, N., Pascoal-Faria, P. (2023). JANUS: an open-source 3D printable perfusion bioreactor and numerical model-based design strategy for tissue engineering. Frontiers in Bioengineering and Biotechnology, 11.
    (https://doi.org/10.3389/fbioe.2023.1308096)

  27. Mostaghel, R., Oghazi, P., Lisboa, A. (2023). The transformative impact of the circular economy on marketing theory. Technological Forecasting and Social Change, Elsevier, 195, 122780.
    (https://doi.org/10.1016/j.techfore.2023.122780)

  28. Neves, H., Cruz, A., Bernardes, R.A., Cardoso, R., Pimentel, M., Duque, F.M., Lopes, E., Veiga, D., Malça, C., Durães, R., Corrente, G., Parreira, P., Apóstolo, J., Parola, V. (2023). Ablefit: Development of an Advanced System for Rehabilitation. BioMedInformatics, 3, 1, 164–176.
    (https://doi.org/10.3390/biomedinformatics3010012)

  29. Pascoal-Faria, P., da Silva, D.P., Mateus, A., Mitchell, G.R. (2023). Digitalisation of material science–Improving product design in the context of Industry 4.0. Materials Today: Proceedings, Elsevier, 55.
    (https://doi.org/10.1016/j.matpr.2023.06.237)

  30. Pedrosa, A., Gaspar, F. (2023). Rheology Assessment of Mortar Materials for Additive Manufacturing. Current Materials Science, Bentham Science, 17, 4, 304-320.
    (https://doi.org/10.2174/2666145417666230801093723)

  31. Pereira, M.R., Silva, G., Semião, V., Martins, J.N.R., Silverio, V., Pascoal-Faria, P., Duarte, I., Alves, N., Ginjeira, A. (2023). Syringe irrigation in confluent canals: A sequential computational fluid dynamics assessment. Australian Endodontic Journal: The Journal of the Australian Society of Endodontology Inc.
    (https://doi.org/10.1111/aej.12805)

  32. Pereira, M.J., Santos, T., Correia, R., Amaral, J.S., Amaral, V.S., Fabbrici, S., Albertini, F. (2023). Mapping the magnetocaloric effect at the microscale on a ferromagnetic shape memory alloy with infrared thermography. JPhys Materials, IOP Publishing, 6, 024002.
    (https://doi.org/10.1088/2515-7639/acc13b)

  33. Reis, T., Barbosa, C., Franco, M., Batista, C., Alves, N., Castelo-Baz, P., Martin-Cruces, J., Martin-Biedma, B. (2023). Root Canal Preparation of a Commercial Artificial Tooth versus Natural Tooth—A MicroCT Study. Applied Sciences, MDPI, 13, 16, 9400.
    (https://doi.org/10.3390/app13169400)

  34. Ryu, S., Mitchell, G.R., Caggiano, A., Radovitzky, R.A., Trovalusci, P., Pugno, N.M. (2023). Editorial Innovators in Mechanics Metamaterials. Frontiers in Materials, Frontiers, 10.
    (https://doi.org/10.3389/fmats.2023.1346034)

  35. Santos, T., Belbut, M., Amaral, J., Amaral, V., Ferreira, N., Alves, N., Pascoal-Faria, P. (2023). Insights into Temperature Simulation and Validation of Fused Deposition Modeling Processes. Journal of Manufacturing and Materials Processing, MDPI, 7, 6, 189.
    (https://doi.org/10.3390/jmmp7060189)

  36. Santos, T., Ramani, M., Devesa, S., Batista, C., Franco, M., Duarte, I., Costa, L., Ferreira, N., Alves, N., Pascoal-Faria, P. (2023). A 3D-Printed Ceramics Innovative Firing Technique: A Numerical and Experimental Study. Materials, MDPI, 16, 18, 6236.
    (https://doi.org/10.3390/ma16186236)

  37. Silva, G.M., Dias, Á.L., Lisboa, A., Silva, F.P. (2023). Drivers and outcomes of sustainable export marketing strategies in international environments. Review of International Business and Strategy, Emerald, 33, 4, 627-648.
    (https://doi.org/10.1108/RIBS-05-2022-0056)

  38. Trambitski, Y., Kizinievič, O., Gaspar, F., Kizinievič, V., Valente, J. F. A. (2023). Eco-friendly unfired clay materials modified by natural polysaccharides. Construction and Building Materials, Elsevier, 400, 132783.
    (https://doi.org/10.1016/j.conbuildmat.2023.132783)

2022

  1. Augusto, A., Miranda, A., Costa, L., Pinheiro, J., Campos, M.J., Raimundo, D., Mitchell, G.R. (2022). A pilot plant scale testing of the application of seaweed based natural coating and modified atmospheric packaging for shelf-life extension of fresh cut apple. Journal of Food Processing and Preservation, Wiley, 46, 16630.
    (https://doi.org/10.1111/jfpp.16630)

  2. Augusto, A., Simões, T., Novais, S.C., Mitchell, G.R., Lemos, M.F.L, Niranjan, K. (2022). An insight into the mechanisms underpinning the anti-browning effect of Codium Tomentosum on fresh cut apples. Food Research International, Elsevier, 161, 111884.
    (https://doi.org/10.1016/j.foodres.2022.111884)

  3. Augusto, A., Miranda, A., Crespo, D., Campos, M.J., Raimundo, D., Pedrosa, R., Mitchell, G., Niranjan, K., Silva, S.F.J. (2022). Preservation of fresh-cut Rocha Pear using Codium tomentosum extract. LWT, Elsevier, 115, 112938.
    (https://doi.org/10.1016/j.lwt.2021.112938)

  4. Angelidou, S., Lisboa, A., Saridakis, C. (2022). Expanding into new product lines in response to COVID-19: The interplay between firm age and performance aspirations. Industrial Marketing Management, Elsevier, 104, 167-181.
    (https://doi.org/10.1016/j.indmarman.2022.04.018)

  5. Bakatovich, A., Gaspar, F., Boltrushevich, N. (2022). Thermal insulation material based on reed and straw fibres bonded with sodium silicate and rosin. Construction and Building Materials, Elsevier, 352, 17.
    (https://doi.org/10.1016/j.conbuildmat.2022.129055)

  6. Biscaia, S., Branquinho, M.V., Alvites, R.D., Fonseca, R., Sousa, A.C., Pedrosa, S.S., Caseiro, A.R, Guedes, F., Patrício, P., Viana, T., Mateus, A., Maurício, A.C., Alves, N. (2022). 3D Printed Poly(𝜀-Caprolactone)/Hydroxyapatite Scaffolds For Bone Tissue Engineering: A Comparative Study On Composite Preparation By Melt Blending Or Solvent Casting Techniques And Influence Of Bioceramic Content On Scaffold Properties. International Journal of Molecular Sciences, MDPI, 23, 4, 1-23.
    (https://doi.org/10.3390/ijms23042318)

  7. Biscaia, S., Silva, J.C., Moura, C., Viana, T., Tojeira, A., Mitchell, G.R., Pascoal-Faria, P., Ferreira, F.C., Alves, N. (2022). Additive Manufactured Poly(ε-caprolactone)-graphene Scaffolds: Lamellar Crystal Orientation, Mechanical Properties and Biological Performance. Polymers, MPDI, 14, 1669.
    (https://doi.org/10.3390/polym14091669)

  8. Braga, R., Rodrigues, P.F., Cordeiro, H., Carreira, P., Vieira, M.T. (2022). The Study of New NiTi Actuators to Reinforce the Wing Movement of Aircraft Systems. Materials, MDPI, 15, 4787.
    (https://www.mdpi.com/1996-1944/15/14/4787)

  9. Branco, R., Costa, J.D., Prates, P.A., Berto, F., Pereira, C., Mateus, A. (2022). Load sequence effects and cyclic deformation behaviour of 7075-T651 aluminium alloy. International Journal of Fatigue, 155.
    (https://doi.org/10.1016/j.ijfatigue.2021.106593)

  10. Cardoso, R., Parola, V., Neves, H., Bernardes, R.A., Duque, F.M., Mendes, C.A., Pimentel, M., Caetano, P., Petronilho, F., Albuquerque, C., Sousa, L.B., Malça, C., Durães, R., Xavier, W., Parreira, P., Apóstolo, J., Cruz, A. (2022). Physical Rehabilitation Programs for Bedridden Patients with Prolonged Immobility: A Scoping Review. Int. J. Environ. Res. Public Health, 19, 6420.
    (https://doi.org/10.3390/ijerph19116420)

  11. Carreira, P., Gatões, D., Alves, N., Ramos, A.S., Vieira, M.T. (2022). Searching New Solutions for NiTi Sensors through Indirect Additive Manufacturing. Materials, MDPI, 15, 5007.
    (https://doi.org/10.3390/ma15145007)

  12. Cordeiro, R., Henriques, M., Silva, C. J., Antunes, F., Alves, N., Moura, C. (2022). Corncob Cellulose Scaffolds: A New Sustainable Temporary Implant for Cartilage Replacement. Journal of Functional Biomaterials, MDPI, 13, 2, 63.
    (https://doi.org/10.3390/jfb13020063)

  13. Costa, A., Gameiro, F., Potencio, A., Silva, D., Carreira, P., Martinez, J.C., Pascoal-Faria, P., Mateus, A., Mitchell, G.R. (2022). Mater. Proc. 2022, MDPI, 8, 30.
    (https://doi.org/10.3390/materproc2022008030)

  14. Costa, A.A., Gameiro, F., Potêncio, A., Silva, D.P.d., Carreira, P., Martinez, J.C., Pascoal-Faria, P., Mateus, A., Mitchell, G.R. (2022). Evaluating the Injection Moulding of Plastic Parts Using In Situ Time-Resolved Small-Angle X-ray Scattering Techniques. Polymers, MDPI, 14, 4745.
    (https://doi.org/10.3390/polym14214745)

  15. Cunha, A., Batista, F.C., Gianfelice, P.R.L., Oyarzabal, R.S., Grzybowski, J.M.V., Macau, E.E.N. (2022). epidWaves: A code for fitting multi-wave epidemic models. Software Impacts, Elsevier, 14, 100391.
    (https://doi.org/10.1016/j.simpa.2022.100391)

  16. da Silva, D.P., Pinheiro, J. Abdulghani, S., Kamma Lorger, C., Martinez, J.C., Solano, E., Mateus, A., Pascoal-Faria, P., Mitchell, G.R. (2022). Changing the Paradigm – Controlling Polymer Morphology during 3D printing Defines Properties. Polymers, MPDI, 14, 1638.
    (https://doi.org/10.3390/polym14091638)

  17. Derdar, H., Mitchell, G.R., Mateus, A., Chaibedraa, S., Elabed, Z.O., Mahendra, V.S., Cherifi, Z., Bachari, K., Chebout, R., Meghabar, R., Harrane, A., Belbachir, M. (2022). Green Copolymers and Nanocomposites from Myrcene and Limonene Using Algerian Nano-Clay as Nano-Reinforcing Filler. Polymers, MPDI, 14, 5271.
    (https://doi.org/10.3390/polym14235271)

  18. Dias, J.R., Sousa, A., Augusto, A., Bártolo, P.J., Granja, P.L. (2022). Electrospun Polycaprolactone (PCL) Degradation: An In Vitro and In Vivo Study. Polymers, MPDI, 14, 3397.
    (https://doi.org/10.3390/polym14163397)

  19. Esfandiari, P., Silva, J.F., Novo, P.J., Nunes, J.P., Marques, A.T. (2022). Production and Processing of Pre-impregnated Thermoplastic Tapes by Pultrusion and Heated Compression Moulding. Journal of Composites Materials, SAGE Journals, 56, 11, 1667-1676.
    (https://doi.org/10.1177/0021998322108384)

  20. Fahfouhi. K., Alhasan, S., Gaspar, F. (2022). Study on the Material Delivery Deviations in Construction Projects in Oman. International Research Journal of Engineering and Technology, 8, 12, 825–833.
    (https://www.irjet.net/archives/V8/i12/IRJET-V8I12142.pdf)

  21. Fatelo, J. P., Martins-Ferreira, N. (2022). Mobi spaces and geodesics for the N-sphere. Cahiers de Topologie et Géométrie Différentielle Catégorique, 63, 1, 59-88.
    (http://cahierstgdc.com/wp-content/uploads/2022/01/Fatelo-Martins-Ferreira-LXIII-1.pdf)

  22. Fatelo, J. P., Martins-Ferreira, N. (2022). Affine mobi spaces. Bollettino dell’Unione Matematica Italiana, 15, 589-604.
    (https://doi.org/10.1007/s40574-022-00324-w)

  23. Ferreira, C. A., Guerreiro, S. F., Valente, J. F. A., Patrício, T. M., Alves, N., Mateus, A., Dias, J. R. (2022). Advanced face mask filters based on PCL electrospun meshes doped with antimicrobial MgO and CuO nanoparticles. Polymers, MDPI.
    (https://doi.org/10.3390/polym14163329)

  24. Flora, S., Cruz, J., Tavares, A., Ferreira, J., Morais, N. (2022). Association between endurance of the trunk extensor muscles and balance performance in community-dwelling older adults: a cross-sectional analysis. International Journal of Therapy and Rehabilitation, Mark Allen Healthcare Publishing, 29, 4, 1–10.
    (https://doi.org/10.12968/ijtr.2020.0036)

  25. Fonseca, A.R., Batista, R., Mateus, A., Faria, P.P., Mitchell, G.R. (2022). Circular Seas – The next challenge for plastics. Polymer Science Peer Review Journal, 3, 1, 551.
    (https://doi.org/10.31031/PSPRJ.2022.03.000551)

  26. Gianfelice, P.R.L., Oyarzabal, R.S., Cunha, A., Grzybowski, J.M.V, Batista, F.C., Macau, E.E.N. (2022). The starting dates of COVID-19 multiple waves. Chaos, AIP Publishing, 32, 3, 031101.
    (https://doi.org/10.1063/5.0079904)

  27. Guedes, F., Branquinho, M.V., Biscaia, S., Alvites, R.D., Sousa, A.C., Lopes, B., Sousa, P., Rêma, A., Amorim, I., Faria, F., Patrício, T.M., Alves, N., Bugalho, A., Maurício, A.C. (2022). Gamma irradiation processing on 3D PCL devices—A preliminary biocompatibility assessment. International Journal of Molecular Sciences, MDPI, 23, 24, 1-16.
    (https://doi.org/10.3390/ijms232415916)

  28. Guerreiro, S.C., Ferreira, C.A.M., Valente, J.F.A., Patrício, T.A.M., Alves, N., Dias, J.R. (2022). Electrospun-based membranes as a key tool to prevent respiratory infections. Polymers, MDPI.
    (https://doi.org/10.3390/polym14183787)

  29. Jud, L., Castro, A.P.G., Ruben, R.B., Feijóo, B., Ribeiro, F., Fernandes, P.R. (2022). 3D modeling of the crystalline lens complex under pseudoexfoliation. Bioengineering, MDPI, 9, 5, 212.
    (https://doi.org/10.3390/bioengineering9050212)

  30. Lamolinara, B., Pérez-Martínez, A., Guardado-Yordi, E., Guillén Fiallos, C., Diéguez-Santana, K., Ruiz-Mercado, G. J. (2022). Anaerobic digestate management, environmental impacts, and techno-economic challenges. Waste Management, Elsevier, 140, 14-30.
    (https://doi.org/10.1016/J.WASMAN.2021.12.035)

  31. Lisboa, A., Vitorino, L., Antunes, R. (2022). Gen Zers’ intention to purchase products with sustainable packaging: An alternative perspective to the attitude-behaviour gap. Journal of Marketing Management, Taylor & Francis, 28, 9-10, 967-992.
    (https://doi.org/10.1080/0267257X.2022.2083214)

  32. Nazhipkyzy, M., Nurgain, A., Zhaparova, A., Issanbekova, A., Mitchell, G.R. (2022). Al/Diatomite based composite materials. Proceedings of the National Academy of Sciences of the Republic of Kazakhstan Chemistry and Technology Series, 146-155.
    (http://89.250.84.46/chemistry-technology/article/view/5620/3909)

  33. Machado, P., Morgado, M., Raposo, J., Mendes, M., Silva, C.G., Morais, N. (2022). Effectiveness of exercise training on cancer-related fatigue in colorectal cancer survivors: a systematic review and meta-analysis of randomized controlled trials. Supportive Care in Cancer, Springer Verlag, 30, 7, 5601-5613.
    (https://doi.org/10.1007/s00520-022-06856-3)

  34. Martins-Ferreira, N. (2022). On the structure of topological spaces. Axioms, MDPI, 11, 49.
    (https://doi.org/10.3390/axioms11020049)

  35. Martins-Ferreira, N., Montoli, A., Patchkoria, A., Sobral, M. (2022). The third cohomology group of a monoid and admissible abstract kernels. International Journal of Algebra and Computation, 32, 5, 1009-1041.
    (https://doi.org/10.1142/S0218196722500436)

  36. Meneses, J., Fernandes, S., Alves, N., Pascoal-Faria, P., Miranda, P.C. (2022). How to correctly estimate the electric field in capacitively coupled systems for tissue engineering: a comparative study. Scientific Reports, Nature, 12, 11049.
    (https://doi.org/10.1038/s41598-022-14834-2)

  37. Patel, M.K., Khanchi, A., Chauhan, A., Kumar, A., Akkireddi, S.R.K., Jangra, A., Kanawade, R., Manivannan, N., Mitchell, G.R. (2022). Real-time measurement of droplet size and its distribution of an air-induced air-assisted electrostatic nozzle. Journal of Electrostatics, Elsevier, 115, 103665.
    (https://doi.org/10.1016/j.elstat.2021.103665)

  38. Pereira, M.R., Silva, G., Semião, V., Silvério, V., Martins, J.N.R, Pascoal-Faria, P., Alves, N., Ginjeira, A. (2022). Experimental validation of a computational fluid dynamics model using microparticle image velocimetry of the irrigation flow in confluent canals. International Endodontic Journal, 55, 12, 1403.
    (https://doi.org/10.1111/iej.13827)

  39. Pereira, D., Carreira, T. S., Alves, N., Sousa, Â., Valente, J. F. A. (2022). Metallic structures: Effective agents to fight pathogenic microorganisms. International Journal of Molecular Sciences, MDPI, 23, 3, 1165.
    (https://doi.org/10.3390/ijms23031165)

  40. Rai, A., Ferrão, R., Palma, P., Patricio, T., Parreira, P., Anes, E., Tonda-Turo, C., Martins, M.C.L., Alves, N., Ferreira, L. (2022). Antimicrobial peptide-based materials: Opportunities and challenges. Journal of Materials Chemistry B, Royal Society of Chemistry, 10, 2384-2429.
    (https://doi.org/10.1039/D1TB02617H)

  41. Reis, T., Barbosa, C., Franco, M., Baptista, C., Alves, N., Castelo-Baz, P., Martin-Cruces, J., Martin-Biedma, B. (2022). 3D-printed teeth in endodontics: Why, how, problems and future—A narrative review. International Journal of Environmental Research and Public Health, MDPI, 19, 7966.
    (https://doi.org/10.3390/ijerph19137966)

  42. Silva, R., Veloso, A., Alves, N., Fernandes, C., Morouço, P. (2022). A review of additive manufacturing studies for producing customized ankle-foot orthoses. Bioengineering, MDPI, 9, 6, 249.
    (https://doi.org/10.3390/bioengineering9060249)

  43. Sousa, A., Almeida, A.M., Valente, J.F.A., Queiroz, J.A., Sousa, F. (2022). A hands-on laboratorial class for biopharmaceutical pDNA quality control. Journal of Chemical Education, ACS Publications.
    (https://doi.org/10.1021/acs.jchemed.1c00695)

  44. Sousa, A.C., Biscaia, S., Alvites, R., Branquinho, M., Lopes, B., Sousa, P., Valente, J.F.A., Franco, M., Santos, J.D., Mendonça, C., Atayde, L., Alves, N., Maurício, A.C. (2022). Assessment of 3D-printed polycaprolactone, hydroxyapatite nanoparticles, and diacrylate poly(ethylene glycol) scaffolds for bone regeneration. Pharmaceutics, MDPI, 14, 12, 1-19.
    (https://doi.org/10.3390/pharmaceutics14122643)

  45. Trindade, D., Alves, N., Moura, C. (2022). From animal to human: (Re)using acellular extracellular matrices for temporomandibular disc substitution. Journal of Functional Biomaterials, MDPI, 13, 2, 61.
    (https://doi.org/10.3390/jfb13020061)

  46. Valente, J.F.A., Carreira, T.S., Dias, J.R., Sousa, F., Alves, N. (2022). Arginine-modified 3D printed chromatographic supports. Pharmaceutics, MDPI.
    (https://doi.org/10.3390/pharmaceutics14112266)

  1.  

2021

  1. Alvites, R.D., Branquinho, M.V., Sousa, A.C., Amorim, I., Magalhães, R., João, F., Almeida, D., Amado, S., Prada, J., Pires, I., Zen, F., Raimondo, S., Luís, A.L., Geuna, S., Varejão, A.S.P., Maurício, A. (2021). Combined use of chitosan and olfactory mucosa mesenchymal stem/stromal cells to promote peripheral nerve regeneration in vivo. Stem Cells International, Hindawi, 2021, 6613029. (https://doi.org/10.1155/2021/6613029)

  2. Ângelo, D.F., Araújo, R.A.D., Sanz, D. (2021). Surgical complications related to temporomandibular joint arthroscopy: a prospective analysis of 39 single-portal versus 43 double-portal procedures. International Journal of Oral and Maxillofacial Surgery, Elsevier, 50, 8, 1089-1094. (https://doi.org/10.1016/j.ijom.2020.07.020)

  3. Ângelo, D.F., Wang, Y., Morouço, P., Monje, F., Mónico, L., González-Garcia, R., Moura, C., Alves, N., Sanz, D., Gao, J. and Sousa, R. (2021). A randomized controlled preclinical trial on 3 interposal temporomandibular joint disc implants: TEMPOJIMS—Phase 2. Journal of Tissue Engineering and Regenerative Medicine, Wiley, 15, 852-868. (http://dx.doi.org/10.1002/term.3230)

  4. Auriemma, F., de Ballesteros, O.R., Giusto, G., Di Girolamo, R., Malafronte, A., Scoti, M., Rosa, C., Mitchell, G.R. (2021). Time-resolving small angle X-Ray scattering analysis of melt crystallization of mixtures of regular and irregular isotactic polypropylene samples. Polymer, Elsevier, 215, 123411. (https://doi.org/10.1016/j.polymer.2021.123411)

  5. Baptista-Silva, S., Borges, S., Costa-Pinto, A.R., Costa, R., Amorim, M., Dias, J.R., Ramos, Ó., Alves, P., Granja, P.L., Soares, R., Pintado, M., Oliveira, A.L. (2021). In situ forming silk sericin-based hydrogel: A novel wound healing biomaterial. ACS Biomaterials Science & Engineering, ACS Publications, 7, 4, 1573-1586. (https://doi.org/10.1021/acsbiomaterials.0c01745)

  6. Batista, C.D., Fernandes, A., Vieira, M.T., Emadinia, O. (2021). From Machining Chips to Raw Material for Powder Metallurgy-A Review. Materials, MDPI, 14, 18, 5432. (https://doi.org/10.3390/ma14185432)

  7. Bernardo, V., Sousa, R., Candeias, P., Costa, A., Campos Costa, A. (2021). Historic Appraisal Review and Geometric Characterization of Old Masonry Buildings in Lisbon for Seismic Risk Assessment. International Journal of Architectural Heritage, Taylor & Francis, 1-21. (https://doi.org/10.1080/15583058.2021.1918287)

  8. De Sio, L., Ding, B., Focsan, M., Kogermann, K., Pascoal-Faria, P., Petronela, F., Mitchell, G., Zussman, E., Pierini, F. (2021). Personalized Reusable Face Masks with Smart Nano-Assisted Destruction of Pathogens for COVID-19: A Visionary Road. Chemistry – A European Journal, Wiley, 27, 20, 6112-6130. (https://doi.org/10.1002/chem.202004875)

  9. Derdar, H., Meghabar, R., Benachour, M., Mitchell, G.R., Bachari, K., Belbachir, M., Cherifi, Z., Baghdadli, M.C., Harrane, A. (2021). Polymer-Clay Nanocomposites: Exfoliation and Intercalation of Organophilic Montmorillonite Nanofillers in Styrene–Limonene Copolymer. Polymer Science, Series A, Springer, 63, 5, 568-575. (https://doi.org/10.1134/S0965545X21050023)

  10. Duarte, M.M., Ribeiro, N., Silva, I.V., Dias, J.R., Alves, N.M., Oliveira, A.L. (2021). Fast Decellularization Process Using Supercritical Carbon Dioxide for Trabecular Bone. Journal of Supercritical Fluids, Elsevier, 172, 105194. (http://dx.doi.org/10.1016/j.supflu.2021.105194)

  11. Dumitriu, R.P., Stoleru, E., Mitchell, G.R., Vasile, C., Brebu, M. (2021). Bioactive Electrospun Fibers of Poly(ε-Caprolactone) Incorporating α-Tocopherol for Food Packaging Applications. Molecules, MDPI, 26, 5498. (https://doi.org/10.3390/molecules26185498)

  12. Ferreira, C.A., Félix, R., Félix, C., Januário, A.P., Alves, N., Novais, S.C., Dias, J.R., Lemos, M.F. (2021). A Biorefinery Approach to the Biomass of the Seaweed Undaria pinnatifida (Harvey Suringar, 1873): Obtaining Phlorotannins-Enriched Extracts for Wound Healing. Biomolecules, MDPI, 11, 3, 461. (https://doi.org/10.3390/biom11030461)

  13. Ferreira, C.A., Januário, A.P., Félix, R., Alves, N., Lemos, M.F., Dias, J.R. (2021). Multifunctional Gelatin/Chitosan Electrospun Wound Dressing Dopped with Undaria pinnatifida Phlorotannin-Enriched Extract for Skin Regeneration. Pharmaceutics, MDPI, 13, 12, 2152. (https://doi.org/10.3390/pharmaceutics13122152)

  14. Flora, S., Hipólito, N., Brooks, D., Marques, A., Morais, N., Silva, C.G., Silva, F., Ribeiro, J., Caceiro, R., Carreira, B.P., Burtin, C., Pimenta, S., Cruz, J., Oliveira, A. (2021). Phenotyping Adopters of Mobile Applications Among Patients With COPD: A Cross-Sectional Study. Frontiers in Rehabilitation Sciences, Frontiers, 2, 729237. (https://doi.org/10.3389/fresc.2021.729237)

  15. Garcias, J.F., Martins, R.F., Branco, R., Marciniak, Z., Macek, W., Pereira, C., Santos, C. (2021). Quasistatic and fatigue behavior of an AISI H13 steel obtained by additive manufacturing and conventional method. Fatigue and Fracture of Engineering Materials and Structures, Wiley, 44, 12, 3384–3398. (https://doi.org/10.1111/ffe.13565)

  16. Guerreiro, S.F.C., Valente, J.F.A., Dias, J.R., Alves, N. (2021). Box-Behnken Design a Key Tool to Achieve Optimized PCL/Gelatin Electrospun Mesh. Macromolecular Materials and Engineering, Wiley, 306, 4, 2000678. (http://dx.doi.org/10.1002/mame.202000678)

  17. Macek, W., Branco, R., Costa, J.D., Pereira, C. (2021). Strain sequence effect on fatigue life and fracture surface topography of 7075-T651 aluminium alloy. Mechanics of Materials, Elsevier, 160, 103972. (https://doi.org/10.1016/j.mechmat.2021.103972)

  18. Martinho, P.G., Pouzada, A.S. (2021). Alternative materials in moulding elements of hybrid moulds: structural integrity and tribological aspects. International Journal of Advanced Manufacturing Technology, Springer, 113, 1, 351-363. (https://doi.org/10.1007/s00170-021-06630-5)

  19. Martins-Ferreira, N., Sobral, M. (2021). Schreier split extensions of preordered monoids. Journal of Logical and Algebraic Methods in Programming, Elsevier, 120, 100643. (https://doi.org/10.1016/j.jlamp.2021.100643)

  20. Mateus, J.C., Lopes, C.D.F., Aroso, M., Costa, A.R., Gerós, A., Meneses, J., Faria, P., Neto, E., Lamghari, M., Sousa, M.M., Aguiar, P. (2021). Bidirectional flow of action potentials in axons drives activity dynamics in neuronal cultures. Journal of Neural Engineering, IOP Publishing, 18, 6, 066045. (https://doi.org/10.1088/1741-2552/ac41db)

  21. Morouço, P., Fernandes, C., Lattanzi, W. (2021). Challenges and innovations in osteochondral regeneration: insights from biology and inputs from bioengineering towards the optimization of tissue engineering strategies. Journal of Functional Biomaterials, MDPI, 12, 1, 17. (https://doi.org/10.3390/jfb12010017)

  22. Ostetto, L., Sousa, R., Rodrigues, H., Fernandes, P. (2021). Assessment of the Seismic Behavior of a Precast Reinforced Concrete Industrial Building with the Presence of Horizontal Cladding Panels. Buildings, MDPI, 11, 9, 400. (https://doi.org/10.3390/buildings11090400)

  23. Parola, V., Neves, H., Duque, F.M., Bernardes, R.A., Cardoso, R., Mendes, C.A., Sousa, L.B., Santos-Costa, P., Malça, C., Durães, R., Parreira, P., Apóstolo, J., Cruz, A. (2021). Rehabilitation Programs for Bedridden Patients with Prolonged Immobility: A Scoping Review Protocol. Int. J. Environ. Res. Public Health, 18, 12033. (https://doi.org/10.3390/ijerph182212033)

  24. Patrício, T.M.F., Mumcuoglu, D., Montesi, M., Panseri, S., Witte-Bouma, J., Garcia, S.F., Sandri, M., Tampieri, A., Farrell, E., Sprio, S. (2021). Bio-inspired polymeric iron-doped hydroxyapatite microspheres as a tunable carrier of rhBMP-2. Materials Science and Engineering: C, Elsevier, 119, 111410. (https://doi.org/10.1016/j.msec.2020.111410)

  25. Pimenta, S., Silva, C.G., Flora, S., Hipólito, N., Burtin, C., Oliveira, A., Morais, N., Brites-Pereira, M., Carreira, B.P., Januário, F. and Andrade, L. (2021). What Motivates Patients with COPD to Be Physically Active? A Cross-Sectional Study. Journal of Clinical Medicine, MDPI, 10, 23, 5631. (https://doi.org/10.3390/jcm10235631)

  26. Pires, J.N., Azar, A.S., Nogueira, F., Zhu, C.Y., Branco, R., Tankova, T. (2021). The role of robotics in additive manufacturing: review of the AM processes and introduction of an intelligent system. Industrial Robot, Emerald Publishing, 49, 2, 311-331. (https://doi.org/10.1108/IR-06-2021-0110)

  27. Pires, T., Santos, J., Ruben, R.B., Gouveia, B.P., Castro, A.P., Fernandes, P.R. (2021). Numerical-experimental analysis of the permeability-porosity relationship in triply periodic minimal surfaces scaffolds. Journal of Biomechanics, Elsevier, 117, 110263. (https://doi.org/10.1016/j.jbiomech.2021.110263)

  28. Rodrigues, H., Vitorino, H., Batalha, N., Sousa, R., Fernandes, P., Varum, H. (2021). Influence of Beam-to-Column Connections in the Seismic Performance of Precast Concrete Industrial Facilities. Structural Engineering International, Taylor & Francis, 1-13. (https://doi.org/10.1080/10168664.2021.1920082)

  29. Santos, C., Gatões, D., Cerejo, F., Vieira, M.T (2021). Influence of Metallic Powder Characteristics on Extruded Feedstock Performance for Indirect Additive Manufacturing. Materials, MDPI, 14, 23, 7136. (https://doi.org/10.3390/ma14237136)

  30. Santos, R.F., Farinha, A.R., Rocha, R., Batista, C., Vieira, M.T. (2021). High speed machining tool-steel chips as an outstanding raw material for indirect additive manufacturing?. Results in Materials, Elsevier, 11, 100207. (https://doi.org/10.1016/j.rinma.2021.100207)

  31. Silva, J.C., Moura, C.S., Borrecho, G., Alves de Matos, A.P., Cabral, J.M., Linhardt, R.J., Ferreira, F.C. (2021). Effects of glycosaminoglycan supplementation in the chondrogenic differentiation of bone marrow- and synovial- derived mesenchymal stem/stromal cells on 3D-extruded poly (ε-caprolactone) scaffolds. International Journal of Polymeric Materials and Polymeric Biomaterials, Taylor & Francis, 70, 3, 207-222. (https://doi.org/10.1080/00914037.2019.1706511)

  32. Silva, M.R., Dias-de-Oliveira, J.A., Pereira, A.M., Alves, N.M., Sampaio, Á.M., Pontes, A.J. (2021). Design of Kinematic Connectors for Microstructured Materials Produced by Additive Manufacturing. Polymers, MDPI, 13, 9, 1500. (https://doi.org/10.3390/polym13091500)

  33. Silva, M.R., Pereira, A.M., Sampaio, Á.M., Pontes, A.J. (2021). Assessment of the Dimensional and Geometric Precision of Micro-Details Produced by Material Jetting. Materials, MDPI, 14, 8, 1989. (https://doi.org/10.3390/ma14081989)

  34. Simões, T., Ferreira, J., Lemos, M.F.L., Augusto, A., Félix, R., Silva, S.F.J., Ferreira-Dias, S., Tecelão, C. (2021). Argan Oil as a Rich Source of Linoleic Fatty Acid for Dietetic Structured Lipids Production. Life, MDPI, 11, 11, 1114. (https://doi.org/10.3390/life11111114)

  35. Sordini, L., Silva, J.C., Garrudo, F.F.F., Rodrigues, C.A.V., Marques, A.C., Linhardt, R.J., Cabral, J.M.S., Morgado, J., Ferreira, F.C. (2021). PEDOT:PPSP-Coated Polybenzimidazole Electroconductive Nanofibers for Biomedical Applications. Polymers, MDPI, 13, 16, 2786. (https://doi.org/10.3390/polym13162786)

  36. Sousa, R., Batalha, N., Silva, V., Rodrigues, H. (2021). Seismic fragility functions for Portuguese RC precast buildings. Bulletin of Earthquake Engineering, Springer. (https://doi.org/10.1007/s10518-020-01007-7)

  37. Trindade, D., Cordeiro, R., José, H.C., Ângelo, D.F., Alves, N. and Moura, C. (2021). Biological Treatments for Temporomandibular Joint Disc Disorders: Strategies in Tissue Engineering. Biomolecules, MDPI, 11, 7, 933. (https://doi.org/10.3390/biom11070933)

  38. Trindade, D., Moura, C., Calado, C., Ângelo, D., Alves, N. (2021). Development of a biocompatible hydrogel based on native temporomandibular joint extracellular matrix powder. World Review of Science, Technology and Sustainable Development, InderScience Enterprises Ltd., 1, 1. (http://dx.doi.org/10.1504/wrstsd.2022.10044167)

  39. Valente, J.F.A., Pereira, P., Sousa, A., Queiroz, J.A., Sousa, F. (2021). Effect of Plasmid DNA Size on Chitosan or Polyethyleneimine Polyplexes Formulation. Polymers, MDPI. (https://doi.org/10.3390/polym13050793)

  40. Valente, J.F.A., Sousa, F., Alves, N. (2021). Additive Manufacturing tools to improve the performance of chromatographic approaches. Trends in Biotechnology, Elsevier. (https://doi.org/10.1016/j.tibtech.2021.03.008)

  41. Valente, J.F.A., Queiroz, J.A., Sousa, F. (2021). Dilemma on plasmid DNA purification: binding capacity vs selectivity. Journal of Chromatography A, Elsevier, 1637, 461848. (https://doi.org/10.1016/j.chroma.2020.461848)

  42. Vallejo, M., Cordeiro, R., Dias, P.A., Moura, C., Henriques, M., Seabra, I.J., Malça, C.M. and Morouço, P. (2021). Recovery and evaluation of cellulose from agroindustrial residues of corn, grape, pomegranate, strawberry-tree fruit and fava. Bioresources and Bioprocessing, Springer, 8, 1, 1-12. (http://dx.doi.org/10.1186/s40643-021-00377-3)

  43. Vasconcelos, I., Franco, M., Pereira, M., Duarte, I., Ginjeira, A., Alves, N. (2021). 3D-printed multisampling holder for microcomputed tomography applied to life and materials science research. Micron, Elsevier, 150. (https://doi.org/10.1016/j.micron.2021.103142)

2020

  1. Amorim, P.H., Moraes, T.F., Silva, J.V., Pedrini, H., Ruben, R.B. (2020). Reconstruction of Panoramic Dental Images Through Bézier Function Optimization. Frontiers in Bioengineering and Biotechnology, Frontiers Media S.A., 8, 794. (http://dx.doi.org/10.3389/fbioe.2020.00794)

  2. Audenaert, E.A., Van den Eynde, J., de Almeida, D.F., Steenackers, G., Vandermeulen, D., Claes, P. (2020). Separating positional noise from neutral alignment in multicomponent statistical shape models. Bone Reports, Elsevier, 12, 100243. (https://doi.org/10.1016/j.bonr.2020.100243)

  3. Bartolomeu, F., Costa, M.M., Alves, N., Miranda, G., Silva, F.S. (2020). Additive manufacturing of NiTi-Ti6Al4V multi-material cellular structures targeting orthopedic implants. Optics and Lasers in Engineering, Elsevier, 134, 106208. (https://doi.org/10.1016/j.optlaseng.2020.106208)

  4. Bartolomeu, F., Costa, M.M., Alves, N., Miranda, G., Silva, F.S. (2020). Engineering the elastic modulus of NiTi cellular structures fabricated by selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials, Elsevier, 110, 103891. (https://doi.org/10.1016/j.jmbbm.2020.103891)

  5. Bartolomeu, F., Dourado, N., Pereira, F., Alves, N., Miranda, G., Silva, F.S. (2020). Additive manufactured porous biomaterials targeting orthopedic implants: A suitable combination of mechanical, physical and topological properties. Materials Science and Engineering: C, Elsevier, 107, 110342. (https://doi.org/10.1016/j.msec.2019.110342)

  6. Carreira, P., Cerejo, F., Alves, N., Vieira, M.T. (2020). In Search of the Optimal Conditions to Process Shape Memory Alloys (NiTi) Using Fused Filament Fabrication (FFF). Materials, MDPI, 13, 21, 4718. (https://doi.org/10.3390/ma13214718)

  7. Derdar, H., Mitchell, G.R., Mahendra, V.S., Benachour, M., Haoue, S., Cherifi, Z., Bachari, K., Harrane, A., Meghabar, R. (2020). Green Nanocomposites from Rosin-Limonene Copolymer and Algerian Clay. Polymers, MDPI, 12, 9, 1971. (https://doi.org/10.3390/polym12091971)

  8. Derdar, H., Mitchell, G.R., Cherifi, Z., Belbachir, M., Benachour, M., Meghabar, R., Bachari, K., Harrane, A. (2020). Ultrasound Assisted Synthesis of Polylimonene and Organomodified-clay Nanocomposites: A Structural, Morphological and Thermal Properties. Bulletin of Chemical Reaction Engineering & Catalysis, Universitas Diponegoro, 15, 3, 798-807. (https://doi.org/10.9767/bcrec.15.3.9185.798-807)

  9. Dias, J.R., Ribeiro, N., Baptista-Silva, S., Costa-Pinto, A.R., Alves, N., Oliveira, A.L. (2020). In situ Enabling Approaches for Tissue Regeneration: Current Challenges and New Developments. Frontiers in Bioengineering and Biotechnology, Frontiers Media S.A., 8, 85. (https://doi.org/10.3389/fbioe.2020.00085)

  10. Figueiredo, L., Fonseca, R., Pinto, L.F.V., Ferreira, F.C., Almeida, A., Rodrigues, A. (2020). Strategy to improve the mechanical properties of bioabsorbable materials based on chitosan for orthopedic fixation applications. Journal of the Mechanical Behavior of Biomedical Materials, Elsevier, 103, 103572. (https://doi.org/10.1016/j.jmbbm.2019.103572)

  11. Gkourmpis, T., Mitchell, G.R. (2020). The Use of Scattering Data in the Study of the Molecular Organisation of Polymers in the Non-Crystalline State. Polymers, MDPI, 12, 12, 2917. (https://doi.org/10.3390/polym12122917)

  12. Martins-Ferreira, N. (2020). A Unified Classification Theorem for Mal’tsev-Like Categories. Applied Categorical Structures, Springer, 28, 2, 323-338. (https://doi.org/10.1007/s10485-019-09580-y)

  13. Martins-Ferreira, N., Montoli, A., Patchkoria, A., Sobral, M. (2020). On the classification of Schreier extensions of monoids with non-abelian kernel. Forum Mathematicum, Degruyter, 32, 3, 607-623. (https://doi.org/10.1515/forum-2019-0164)

  14. Meneses, J., Silva, J.C., Fernandes, S.R., Datta, A., Ferreira, F.C., Moura, C., Amado, S., Alves, N., Pascoal-Faria, P. (2020). A Multimodal Stimulation Cell Culture Bioreactor for Tissue Engineering: A Numerical Modelling Approach. Polymers, MDPI, 12, 4, 940. (https://doi.org/10.3390/polym12040940)

  15. Morouço, P., Azimi, B., Milazzo, M., Mokhtari, F., Fernandes, C., Reis, D., Danti, S. (2020). Four-Dimensional (Bio-)printing: A Review on Stimuli-Responsive Mechanisms and Their Biomedical Suitability. Applied Sciences, MDPI, 10, 24, 9143. (https://doi.org/10.3390/app10249143)

  16. Moura, C., Trindade, D., Vieira, M., Francisco, L., Ângelo, D.F., Alves, N. (2020). Multi-Material Implants for Temporomandibular Joint Disc Repair: Tailored Additive Manufacturing Production. Frontiers in Bioengineering and Biotechnology, Frontiers Media S.A., 8, 342. (https://doi.org/10.3389/fbioe.2020.00342)

  17. Moura, C.S., Silva, J.C., Faria, S., Fernandes, P.R., da Silva, C.L., Cabral, J.M.S., Linhardt, R., Bártolo, P.J., Ferreira, F.C. (2020). Chondrogenic differentiation of mesenchymal stem/stromal cells on 3D porous poly (ε-caprolactone) scaffolds: Effects of material alkaline treatment and chondroitin sulfate supplementation. Journal of Bioscience and Bioengineering, Elsevier, 129, 6, 756-764. (https://doi.org/10.1016/j.jbiosc.2020.01.004)

  18. Nogueira, F., Cunha, J., Mateus, A., Malça, C., Costa, J.D., Branco, R. (2020). Cyclic plastic behaviour of 7075 aluminium alloy. Procedia Structural Integrity, 25, 438-444. (https://doi.org/10.1016/j.prostr.2020.04.049)

  19. Pattanashetti, N.A., Viana, T., Alves, N., Mitchell, G.R., Kariduraganavar, M.Y. (2020). Development of novel 3D scaffolds using BioExtruder by varying the content of hydroxyapatite and silica in PCL matrix for bone tissue engineering. Journal of Polymer Research, Springer, 27, 4, 1-13. (https://doi.org/10.1007/s10965-020-02053-0)

  20. Pereira, T., Barroso, S., Mendes, S., Amaral, R.A., Dias, J.R., Baptista, T., Saraiva, J.A., Alves, N.M., Gil, M.M. (2020). Optimization of phycobiliprotein pigments extraction from red algae Gracilaria gracilis for substitution of synthetic food colorants. Food Chemistry, Elsevier, 321, 126688. (https://doi.org/10.1016/j.foodchem.2020.126688)

  21. Premakshi, H.G., Kariduraganavar, M.Y., Mitchell, G.R. (2020). Crosslinked Nanocomposite Sodium Alginate-Based Membranes with Titanium Dioxide for the Dehydration of Isopropanol by Pervaporation. Molecules, MDPI, 25, 6, 1298. (https://doi.org/10.3390/molecules25061298)

  22. Reboleira, J., Adão, P., Guerreiro, S.F., Dias, J.R., Ganhão, R., Mendes, S., Andrade, M., Vilarinho, F., Sanches-Silva, A., Mateus, A., Alves, N., Bernardino, S. (2020). Poultry Shelf-Life Enhancing Potential of Nanofibers and Nanoparticles Containing Porphyra dioica Extracts. Coatings, MDPI, 10, 4, 315. (https://doi.org/10.3390/coatings10040315)

  23. Ruiz-Navarro, J.J., Morouço, P.G., Arellano, R. (2020). Relationship Between Tethered Swimming in a Flume and Swimming Performance. International Journal of Sports Physiology and Performance, Human Kinetics, 15, 8, 1087-1094. (https://doi.org/10.1123/ijspp.2019-0466)

  24. Santos, T., Hennetier, L., Costa, V.A., Costa, L.C. (2020). Microwave vs conventional porcelain firing: Macroscopic properties. International Journal of Applied Ceramic Technology, Wiley, 17, 5, 2277-2285. (https://doi.org/10.1111/ijac.13569)

  25. Silva, J.C., Moura, C.S., Borrecho, G., de Matos, A.P.A., da Silva, C.L., Cabral, J.M., Bártolo, P.J., Linhardt, R.J., Ferreira, F.C. (2020). Extruded Bioreactor Perfusion Culture Supports the Chondrogenic Differentiation of Human Mesenchymal Stem/Stromal Cells in 3D Porous Poly(ε-Caprolactone) Scaffolds. Biotechnology Journal, Wiley, 15, 2, 1900078. (https://doi.org/10.1002/biot.201900078)

  26. Silva, J.C., Carvalho, M.S., Udangawa, R.N., Moura, C.S., Cabral, J.M.S., L da Silva, C., Ferreira, F.C., Vashishth, D., Linhardt, R.J. (2020). Extracellular matrix decorated polycaprolactone scaffolds for improved mesenchymal stem/stromal cell osteogenesis towards a patient-tailored bone tissue engineering approach. Journal of Biomedical Materials Research Part B: Applied Biomaterials, Wiley, 108, 5, 2153-2166. (https://doi.org/10.1002/jbm.b.34554)

  27. Sio, L., De, Ding, B., Focsan, M., Kogermann, K., Pascoal-Faria, P., Petronela, F., Mitchell, G., Zussman, E., Pierin, F. (2020). Personalized Reusable Face Masks with Smart Nano-Assisted Destruction of Pathogens for COVID-19: A Visionary Road. Chemistry – A European Journal, Wiley, 27, 20, 6112-6130. (https://doi.org/10.1002/chem.202004875)

  28. Solla, M., Gonçalves, L., Gonçalves, G., Francisco, C., Puente, I., Providência, P., Florindo, G., Rodrigues, H. (2020). A building information modeling approach to integrate geomatic data for the documentation and preservation of cultural heritage. Remote Sensing, MDPI, 12, 24, 4028. (https://doi.org/10.3390/rs12244028)

  29. Valente, J.F.A., Sousa, A., Azevedo, G.A., Queiroz, J.A., Sousa, F. (2020). Purification of supercoiled p53-encoding plasmid using an arginine-modified macroporous support. Journal of Chromatography A, Elsevier, 1618, 460890. (https://doi.org/10.1016/j.chroma.2020.460890)

  30. Vincze, G., Simões, F.J.P., Butuc, M.C. (2020). Asymmetrical Rolling of Aluminum Alloys and Steels: A Review. Metals, MDPI, 10, 9, 1126. (https://doi.org/10.3390/met10091126)

  31. Zaoui, A., Mahendra, V., Mitchell, G., Cherifi, Z., Harrane, A., Belbachir, M. (2020). Design, Synthesis and Thermo-chemical Properties of Rosin Vinyl Imidazolium Based Compounds as Potential Advanced Biocompatible Materials. Waste and Biomass Valorization, Springer, 11, 7, 3723-3730. (https://doi.org/10.1007/s12649-019-00691-0)

2019

  1. Abdulghani, S., Mitchell, G.R. (2019). Biomaterials for In Situ Tissue Regeneration: A Review. Biomolecules, MDPI, 9(11), 750. (https://doi.org/10.3390/biom9110750)

  2. Abdulghani, S., Morouço, P.G. (2019). Biofabrication for osteochondral tissue regeneration: bioink printability requirements. Journal of Materials Science: Materials in Medicine, Springer, 30(2), 20. (https://doi.org/10.1007/s10856-019-6218-x)

  3. Amaro, N.M., Morouço, P.G., Marques, M.C., Batalha, N., Neiva, H., Marinho, D.A. (2019). A systematic review on dry-land strength and conditioning training on swimming performance. Science and Sports, Elsevier, 34(1), e1-e14. (https://doi.org/10.1016/j.scispo.2018.07.003)

  4. Audenaert, E.A., Van Houcke, J., Almeida, D.F., Paelinck, L., Peiffer, M., Steenackers, G., Vandermeulen, D. (2019). Cascaded statistical shape model based segmentation of the full lower limb in CT. Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis, 22(6), 644-657. (https://doi.org/10.1080/10255842.2019.1577828)

  5. Azevedo, G.M., Valente, J.F.A., Sousa, A., Pedro, A.Q., Pereira, P., Sousa, F., Queiroz, J.A. (2019). Effect of Chromatographic Conditions on Supercoiled Plasmid DNA Stability and Bioactivity. Applied Sciences, MDPI, 9(23), 5170. (https://doi.org/10.3390/app9235170)

  6. Bakatovich, A., Gaspar, F. (2019). Composite material for thermal insulation based on moss raw material. Construction and Building Materials, Elsevier, 228, 116699. (https://doi.org/10.1016/j.conbuildmat.2019.116699)

  7. Baptista, C., Martins, G., Santos, C., Mateus, A., Antunes, F. (2019). Microstructure of Thermoplastic Composites Reinforced with Wool and Wood. Applied Mechanics and Materials, Trans Tech Publications, 890, 98-112. (https://doi.org/10.4028/www.scientific.net/AMM.890.98)

  8. Bartolomeu, F., Abreu, C.S., Moura, C.G., Costa, M.M., Alves, N., Silva, F.S., Miranda, G. (2019). Ti6Al4V-PEEK multi-material structures – design, fabrication and tribological characterization focused on orthopedic implants. Tribology International, Elsevier, 131, 672-678. (https://doi.org/10.1016/j.triboint.2018.11.017)

  9. Bartolomeu, F., Buciumeanu, M., Costa, M.M., Alves, N., Gasik, M., Silva, F.S., Miranda, G. (2019). Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: a tribocorrosion study targeting orthopedic applications. Journal of the Mechanical Behavior of Biomedical Materials, Elsevier, 89, 54-64. (https://doi.org/10.1016/j.jmbbm.2018.09.009)

  10. Bartolomeu, F., Costa, M.M., Gomes, J.R., Alves, N., Abreu, C.S., Silva, F.S., Miranda, G. (2019). Implant surface design for improved implant stability–A study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting. Tribology International, Elsevier, 129, 272-282. (https://doi.org/10.1016/j.triboint.2018.08.012)

  11. Bartolomeu, F., Fonseca, J., Peixinho, N., Alves, N., Gasik, M., Silva, F.S., Miranda, G. (2019). Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants. Journal of the Mechanical Behavior of Biomedical Materials, Elsevier, 99, 104-117. (https://doi.org/10.1016/j.jmbbm.2019.07.023)

  12. Brites, F., Malça, C., Gaspar, F., Horta, J.F., Franco, M.C., Biscaia, S., Mateus, A. (2019). The Use of Polypropylene and High-Density Polyethylene on Cork Plastic Composites for Large Scale 3D Printing. Applied Mechanics and Materials, Trans Tech Publications, 890, 205-225. (https://doi.org/10.4028/www.scientific.net/AMM.890.205)

  13. Castelo Ferreira, P., Pascoal-Faria, P., Carreira, P., Alves, N. (2019). A Computer Simulation of the Nitinol Thermal Expansion under Fast Varying Working Conditions. Applied Mechanics and Materials, Trans Tech Publications, 890, 162-173. (https://doi.org/10.4028/www.scientific.net/AMM.890.162)

  14. Castro, A.P.G., Ruben, R.B., Gonçalves, S.B., Pinheiro, J., Guedes, J.M., Fernandes, P.R. (2019). Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering. Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis, 22(6), 567-573. (https://doi.org/10.1080/10255842.2019.1569638)

  15. Clementino, M.M., Martins-Ferreira, N., Montoli, A. (2019). On the categorical behaviour of preordered groups. Journal of Pure and Applied Algebra, Elsevier, 223(10), 4226-4245. (https://doi.org/10.1016/j.jpaa.2019.01.006)

  16. Costa, M.M., Bartolomeu, F., Alves, N., Silva, F.S., Miranda, G. (2019). Tribological behavior of bioactive multi-material structures targeting orthopedic applications. Journal of the Mechanical Behavior of Biomedical Materials, Elsevier, 94, 193-200. (https://doi.org/10.1016/j.jmbbm.2019.02.028)

  17. Costa, M.M., Dantas, T.A., Bartolomeu, F., Alves, N., Silva, F.S., Miranda, G., Toptan, F. (2019). Corrosion behaviour of PEEK or ß-TCP-impregnated Ti6Al4V SLM structures targeting biomedical applications. Transactions of Nonferrous Metals Society of China, Elsevier, 29(12), 2523-2533. (https://doi.org/10.1016/S1003-6326(19)65160-5)

  18. Costa, M.M., Lima, R., Melo-Fonseca, F., Bartolomeu, F., Alves, N., Miranda, A., Gasik, M., Silva, F.S., Silva, N.A, Miranda, G. (2019). Development of ß-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties. Materials Science and Engineering: C, Elsevier, 98, 705-716. (https://doi.org/10.1016/j.msec.2019.01.016)

  19. Fatelo, J.P., Martins-Ferreira, N. (2019). Mobi algebra as an abstraction to the unit interval and its comparison to rings. Communications in Algebra, Taylor & Francis, 47(3), 1197-1214. (https://doi.org/10.1080/00927872.2018.1501575)

  20. Fernandes, C., Heggannavar, G.B., Kariduraganavar, M.Y., Mitchell, G.R., Alves, N., Morouço, P. (2019). Smart Materials for Biomedical Applications: The Usefulness of Shape-Memory Polymers. Applied Mechanics and Materials, Trans Tech Publications, 890, 237-247. (https://doi.org/10.4028/www.scientific.net/AMM.890.237)

  21. Fernandes, S.R., Pereira, M., Salvador, R., Miranda, P.C., de Carvalho, M. (2019). Cervical trans-spinal direct current stimulation: a modelling-experimental approach. Journal of NeuroEngineering and Rehabilitation, Springer, 16(1), 1-14. (https://doi.org/10.1186/s12984-019-0589-6

  22. Ferreira, V., Lisboa, A. (2019). Innovation and Entrepreneurship: from Schumpeter to Industry 4.0. Applied Mechanics and Materials, Trans Tech Publications, 890, 174-180. (https://doi.org/10.4028/www.scientific.net/AMM.890.174)

  23. Fonseca, D.A., Simões, F.J. (2019). Direct Digital Manufacturing in the Context of a Circular Economy. Applied Mechanics and Materials, Trans Tech Publications, 890, 21-33. (https://doi.org/10.4028/www.scientific.net/AMM.890.21)

  24. Franco, M.C., Fonseca, R., Gomes, S., Biscaia, S., Brites, F., Pascoal-Faria, P., Mateus, A. (2019). Traffic Vertical Signposting: Materials Characterization and Structural Numerical Simulation. Applied Mechanics and Materials, Trans Tech Publications, 890, 190-198. (https://doi.org/10.4028/www.scientific.net/AMM.890.190)

  25. Freitas, P., Santos, C., Carreira, P., Mateus, A. (2019). High Efficiency Cooling and Heating Channels for Injection Moulding. Applied Mechanics and Materials, Trans Tech Publications, 890, 43-53. (https://doi.org/10.4028/www.scientific.net/AMM.890.43)

  26. Gaspar, M., Pascoal-Faria, P., Amado, S., Alves, N. (2019). A Computer Tool for 3D Shape Recovery of Fruits. Applied Mechanics and Materials, Trans Tech Publications, 890, 181-189. (https://doi.org/10.4028/www.scientific.net/AMM.890.181)

  27. Gomes, S., Pascoal-Faria, P., Mitchell, G.R., Gkourmpis, T., Youngs, T. (2019). Numerical Thermal Analysis of a T Jump System Used for Studying Polymer Behaviour. Applied Mechanics and Materials, Trans Tech Publications, 890, 155-161. (https://doi.org/10.4028/www.scientific.net/AMM.890.155)

  28. Gordo, J.J., Pascoal-Faria, P., Mateus, A., Morouço, P., Schiriati, V., Amado, S. (2019). Biomechanical Outcomes Related with Gait in Children with Cerebral Palsy Using Ankle-Foot Orthotic – A Systematic Review. Applied Mechanics and Materials, Trans Tech Publications, 890, 301-313. (https://doi.org/10.4028/www.scientific.net/AMM.890.301)

  29. Heggannavar, G.B., Achari, D., Fernandes, C., Mitchell, G.R., Morouço, P., Kariduraganavar, M.Y. (2019). Smart polymers in drug delivery applications. Applied Mechanics and Materials, Trans Tech Publications, 890, 324-339. (https://doi.org/10.4028/www.scientific.net/AMM.890.324)

  30. Infante, V., Madeira, J.F.A., Ruben, R.B., Moleiro, F., de Freitas, S.T. (2019). Characterization and optimization of hybrid carbon–glass epoxy composites under combined loading. Journal of Composite Materials, SAGE journals, 53(18), 2593-2605. (https://doi.org/10.1177/0021998319834673)

  31. Khan, I., Kamma-Lorger, C.S., Mohan, S.D., Mateus, A., Mitchell, G.R. (2019). The Exploitation of Polymer Based Nanocomposites for Additive Manufacturing: A Prospective Review. Applied Mechanics and Materials, Trans Tech Publications, 890, 113-145. (https://doi.org/10.4028/www.scientific.net/AMM.890.113)

  32. Koutsonas, S., Mitchell, G.R., Davis, F.J. (2019). Microwave treatment of polyacrylonitrile powder method development and effects of surface modification porosity for supercapacitor devices or other mobile applications. Applied Mechanics and Materials, Trans Tech Publications, 890, 146-154. (https://doi.org/10.4028/www.scientific.net/AMM.890.146)

  33. Lopes, S., Filipe, L., Silva, R., Cruz, A., Parreira, P., Couto, F., Bernardes, R., Apóstolo, J., Roseiro, L., Malça, C. (2019). An Innovative Concept for a Walker with a Self-Locking Mechanism Using a Single Mechanical Approach. International Journal of Environmental Research and Public Health, 16(10), 1671. (https://doi.org/10.3390/ijerph16101671)

  34. Lopes, J., Fonseca, R., Viana, T., Fernandes, C., Morouço, P., Moura, C., Biscaia, S. (2019). Characterization of Biocompatible Poly(Ethylene Glycol)-Dimethacrylate Hydrogels for Tissue Engineering. Applied Mechanics and Materials, Trans Tech Publications, 890, 290-300. (https://doi.org/10.4028/www.scientific.net/AMM.890.290)

  35. Mahendra, V. (2019). Rosin Product Review. Applied Mechanics and Materials, Trans Tech Publications, 890, 77-91. (https://doi.org/10.4028/www.scientific.net/AMM.890.77)

  36. Martins-Ferreira, N., Alves, N., Mitchell, G.R. (2019). Towards a Conceptual Notion for a Universal Printing Machine. Applied Mechanics and Materials, Trans Tech Publications, 890, 61-69. (https://doi.org/10.4028/www.scientific.net/AMM.890.61)

  37. Miranda, G., Faria, S., Bartolomeu, F., Pinto, E., Alves, N., Peixinho, N., Gasik, M., Silva, F. S. (2019). A study on the production of thin-walled Ti6Al4V parts by selective laser melting. Journal of Manufacturing Processes, Elsevier, 39, 346-355. (https://doi.org/10.1016/j.jmapro.2018.12.036)

  38. Mitchell, G.R., Pratumshat, S., Olley, R. (2019). Polyethylene and the Nucleating Agent: Dibenzylidene Sorbitol, a Neutron Scattering Study. Applied Mechanics and Materials, Trans Tech Publications, 890, 199-204. (https://doi.org/10.4028/www.scientific.net/AMM.890.199)

  39. Mohan, S.D., Nazhipkyzy, M., Carreira, P., Santos, C., Davis, F.J., Mateus, A., Mitchell, G.R. (2019). Direct Digital Manufacturing of Nanocomposites. Applied Mechanics and Materials, Trans Tech Publications, 890, 92-97. (https://doi.org/10.4028/www.scientific.net/AMM.890.92)

  40. Morais, N., Cruz, J., Marques, A. (2019). The Kinematic Chain of Arm Elevation Is Impaired in Patients with Chronic Obstructive Pulmonary Disease. Journal of Chronic Obstructive Pulmonary Disease, Taylor & Francis, 16(3-4), 240-245. (https://doi.org/10.1080/15412555.2019.1632281)

  41. Morouço, P., Fernandes, C., Santos-Rocha, R. (2019). Osteoarthritis, Exercise and Tissue Engineering: a stimulating triad for health professionals. Journal of Aging Research, Hindawi. (https://doi.org/10.1155/2019/1935806)

  42. Morouço, P., Gil, J. (2019). Four-Dimensional Bioprinting for Regenerative Medicine: Mechanisms to Induce Shape Variation and Potential Applications. EMJ Innov., 3(1), 36-43. (https://doi.org/10.33590/emjinnov/18-00070)

  43. Moura, C., Santos-Rocha, R., Franco, S., Malça, C., Galhano, C., Henriques, M., Morouço, P. (2019). A Brief Review on Processes for Cartilage Repair. Applied Mechanics and Materials, Trans Tech Publications, 890, 229-236. (https://doi.org/10.4028/www.scientific.net/AMM.890.229)

  44. Nolasco, P., Coelho, P.V., Coelho, C., Angelo, D.F., Dias, J.R., Alves, N.M., Maurício, A., Pereira, M.F.C., Matos, A.P.A., Martins, R.C., Carvalho, P.A. (2019). Mineralization of Sialoliths Investigated by Ex Vivo and In Vivo X-ray Computed Tomography. Microscopy and Microanalysis, Microscopy Society of America, 25(1), 151-163. (https://doi.org/10.1017/S1431927618016124)

  45. Pascoal-Faria, P., Castelo Ferreira, P., Datta, A., Amado, S., Moura, C., Alves, N. (2019). Electrical Stimulation Optimization in Bioreactors for Tissue Engineering Applications. Applied Mechanics and Materials, Trans Tech Publications, 890, 314-323. (https://doi.org/10.4028/www.scientific.net/AMM.890.314)

  46. Patrício, T.M.F., Panseri, S., Montesi, M., Iafisco, M., Sandri, M., Tampieri, A., Sprio, S. (2019). Superparamagnetic hybrid microspheres affecting osteoblasts behaviour. Materials Science and Engineering: C, Elsevier, 96, 234-247. (https://doi.org/10.1016/j.msec.2018.11.014)

  47. Pattanashetti, N.A., Biscaia, S., Moura, C., Mitchell, G.R., Kariduraganavar, M.Y. (2019). Development of novel 3D scaffolds using BioExtruder by the incorporation of silica into polycaprolactone matrix for bone tissue engineering. Materials Today Communications, Elsevier, 21, 100651. (https://doi.org/10.1016/j.mtcomm.2019.100651)

  48. Pereira, A.M., Silva, M.R., Domingues, M.A., Sá, J.C. (2019). Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study. Quality Innovation Prosperity, QIP – Quality Innovation Prosperity, 23(3), 103. (https://doi.org/10.12776/qip.v23i3.1334)

  49. Reis, D., Biscaia, S., Seabra, I.J., Veloso, A., Morouço, P. (2019). Fabrication of Poly(Glycerol Sebacate)-Poly(ε-Caprolactone) Extrusion-Based Scaffolds for Cartilage Regeneration. Applied Mechanics and Materials, Trans Tech Publications, 890, 268-274. (https://doi.org/10.4028/www.scientific.net/AMM.890.268)

  50. Santos, T., Hennetier, L., Costa, V.A.F., Costa, L.C. (2019). Microwave versus conventional porcelain firing: Temperature measurement. Journal of Manufacturing Processes, Elsevier, 41, 92-100. (https://doi.org/10.1016/j.jmapro.2019.03.038)

  51. Serôdio, R., Schickert, S.L., Costa-Pinto, A.R., Dias, J.R., Granja, P.L., Yang, F., Oliveira, A.L. (2019). Ultrasound sonication prior to electrospinning tailors silk fibroin/PEO membranes for periodontal regeneration. Materials Science and Engineering: C, Elsevier, 98, 969-981. (https://doi.org/10.1016/j.msec.2019.01.055)

  52. Silva, A.R., Carreira, P., Santos, C., Reis, M., Mateus, A. (2019). I.Film: Using Electrospinning to Create Bioactive Films. Applied Mechanics and Materials, Trans Tech Publications, 890, 260-267. (https://doi.org/10.4028/www.scientific.net/AMM.890.260)

  53. Silva, R., Dimas, I.S., Fernandez, J.W., Alves, N., Morouço, P., Maurício, A.C., Veloso, A., Amado, S. (2019). Sheep Gait Biomechanics and the Assessment of Musculoskeletal Conditions: A Systematic Review. Applied Mechanics and Materials, Trans Tech Publications, 890, 248-259. (https://doi.org/10.4028/www.scientific.net/AMM.890.248)

  54. Silva, R., Sereno, P., Mateus, A., Mitchell, G.R., Carreira, P., Santos, C., Vitorino, J., Domingues, J. (2019). Adaptive Platforms and Flexible Deposition System for Big Area Additive Manufacturing (BAAM). Applied Mechanics and Materials, Trans Tech Publications, 890, 3-20. (https://doi.org/10.4028/www.scientific.net/AMM.890.3)

  55. Silva, M.R., Domingues, J., Costa, J., Mateus, A., Malça, C. (2019). Study of Metal/Polymer Interface of Parts Produced by a Hybrid Additive Manufacturing Approach. Applied Mechanics and Materials, Trans Tech Publications, 890, 34-42. (https://doi.org/10.4028/www.scientific.net/AMM.890.34)

  56. Silva, M.R., Pereira, A.M., Alves, N., Mateus, G., Mateus, A., Malça, C. (2019). Development of an additive manufacturing system for the deposition of thermoplastics impregnated with carbon fibers. Journal of Manufacturing and Materials Processing, MDPI, 3(2), 35. (https://doi.org/10.3390/jmmp3020035)

  57. Sousa, D., Biscaia, S., Viana, T., Gaspar, M., Mahendra, V., Mohan, S.D., Mateus, A., Mitchell, G.R. (2019). Rosin Based Composites for Additive Manufacturing. Applied Mechanics and Materials, Trans Tech Publications, 890, 70-76. (https://doi.org/10.4028/www.scientific.net/AMM.890.70)

  58. Tavares, Ó.M., Duarte, J.P., Werneck, A.O., Costa, D.C., Sousa-e-Silva, P., Martinho, D., Luz, L., Morouço, P., Valente-dos-Santos, J., Soles-Gonçalves, R., Conde, J., Casanova, J.M., Coelho-e-Silva, M.J. (2019). Body composition, strength static and isokinetic, and bone health: comparative study between active adults and amateur soccer players. Einstein (São Paulo), Scielo, 17(3), eAO4419. (https://doi.org/10.31744/einstein_journal/2019ao4419)

  59. Valente, J.F.A., Dias, J.R., Sousa, A., Alves, N. (2019). Composite Central Face Design—An Approach to Achieve Efficient Alginate Microcarriers. Polymers, MDPI, 11(12), 1949. (https://doi.org/10.3390/polym11121949)

  60. Valente, J.F.A., Sousa, A., Queiroz, J.A., Sousa, F. (2019). DoE to improve supercoiled p53-pDNA purification by O-phospho-l-tyrosine chromatography. Journal of Chromatography B, Elsevier, 1105, 184-192. (https://doi.org/10.1016/j.jchromb.2018.12.002)

  61. Van Houcke, J., Galibarov, P.E., Van Acker, G., Fauconnier, S., Allaert, E., Van Hoof, T., Almeida, D.F., Steenackers, G., Pattyn, C., Audenaert, E.A. (2019). Personalized hip joint kinetics during deep squatting in young, athletic adults. Computer Methods in Biomechanics and Biomedical Engineering, Taylor & Francis, 23(1), 23-21. (https://doi.org/10.1080/10255842.2019.1699539)

  62. Vasco, J., Barreiros, F.M., Nabais, A., Reis, N. (2019). Additive manufacturing applied to injection moulding: technical and economic impact. Rapid Prototyping Journal, Emerald Publishing, 25(7), 1241-1249. (http://dx.doi.org/10.1108/rpj-07-2018-0179)

  63. Vasconcelos, I., Pereira, M.R., Ginjeira, A., Franco, M.C., Morouço, P., Alves, N. (2019). Evaluation of Root Canal Filling with a Bioceramic Sealer Using Micro-Computed Tomography: A Pilot Study. Applied Mechanics and Materials, Trans Tech Publications, 890, 275-282. (https://doi.org/10.4028/www.scientific.net/AMM.890.275)

  64. Viana, T., Biscaia, S., Dabrowska, E., Franco, M.C., Carreira, P., Morouço, P., Alves, N. (2019). A novel biomanufacturing system to produce multi-material scaffolds for tissue engineering: Concept and preliminary results. Applied Mechanics and Materials, Trans Tech Publications, 890, 283-289. (https://doi.org/10.4028/www.scientific.net/AMM.890.283)

  65. Vitorino, J., Ribeiro, E., Silva, R., Santos, C., Carreira, P., Mitchell, G.R., Mateus, A. (2019). Industry 4.0 – Digital Twin Applied to Direct Digital Manufacturing. Applied Mechanics and Materials, Trans Tech Publications, 890, 54-60. (https://doi.org/10.4028/www.scientific.net/AMM.890.54)

2018

  1. Ângelo, D.F., Gil, F.M., González-García, R., Mónico, L., Sousa, R., Neto, L., Caldeira, I., Moura, C., Francisco, L.C., Sanz, D., Alves, N., Salgado, F., Morouço, P. (2018). Effects of bilateral discectomy and bilateral discopexy on black Merino sheep rumination kinematics: TEMPOJIMS – phase 1 – pilot blinded, randomized preclinical study. Journal of Cranio-Maxillo-facial Surgery, Elsevier, 46, 2, 346-355.
    (https://doi.org/10.1016/j.jcms.2017.11.022)

  2. Ângelo, D.F., Monje, F., Gonzalez, R., Morouco, P., Alves, N., Salvado, F. (2018). Black Merino Sheep: suitable animal model for temporomandibular joint interposal material research. Annals of Medicine, Taylor & Francis, Ltd., 50, Supp 1, S87-S88.
    (https://doi.org/10.1080/07853890.2018.1427460)

  3. Ângelo, D.F., Morouço, P., Gil, F.M., Mónico, L., González-Gárcia, R., Sousa, R., Neto, L., Caldeira, I., Smith, M., Smith, S., Sanz, D., Santos, F.A., Pinho, M., Carrapiço, B., Cavaco, S., Moura, C., Alves, N., Salvado, F., Little, C. (2018). Preclinical randomized controlled trial of bilateral discectomy versus bilateral discopexy in Black Merino sheep temporomandibular joint: TEMPOJIMS – Phase 1- histologic, imaging and body weight results. Journal of Cranio-Maxillo-facial Surgery, Elsevier, 46, 4, 688-696.
    (https://doi.org/10.1016/j.jcms.2018.01.006)

  4. Araújo, A., Barbeiro, S., Ghalati, M.K. (2018). Convergence of an explicit iterative leap-frog discontinuous Galerkin method for time-domain Maxwell’s equations in anisotropic materials. Journal of Mathematics in Industry, Springer, 8, 1, 1-16.
    (https://doi.org/10.1186/s13362-018-0051-6)

  5. Augusto, A., Dias, J.R., Campos, M.J., Alves, N.M., Pedrosa, R., Silva, S.F. (2018). Influence of Codium tomentosum Extract in the Properties of Alginate and Chitosan Edible Films. Foods, MDPI, 7, 4, 53.
    (https://doi.org/10.3390/foods7040053)

  6. Auriemma, F., De Rosa, C., Di Girolamo, R., Malafronte, A., Scoti, M., Mitchell, G.R., Esposito, S. (2018). Time-resolving study of stress-induced Transformations of Isotactic Polypropylene through Wide-Angle X-Ray Scattering Measurements. Polymers, MDPI, 10, 2, 162.
    (https://doi.org/10.3390/polym10020162)

  7. Bakatovich, A., Davydenko, N., Gaspar, F. (2018). Thermal insulating plates produced on the basis of vegetable agricultural waste. Energy & Buildings, Elsevier, 180, 72-82.
    (https://doi.org/10.1016/j.enbuild.2018.09.032)

  8. Buciumeanu, M., Almeida, S., Bartolomeu, F., Costa, M.M., Alves, N., Silva, F.S., Miranda, G. (2018). Ti6Al4V cellular structures impregnated with biomedical PEEK – New material design for improved tribological behavior. Tribology International, Elsevier, 119, 157-164.
    (https://doi.org/10.1016/j.triboint.2017.10.038)

  9. Daulbayev, C., Mitchell, G., Zakhidov, A., Sultanov, F., Mansurov, Z. (2018). Obtaining of Biologically Soluble Membranes Based on Polymeric Nanofibres and Hydroxyapatite of Calcium. Eurasian Chemico-Technological Journal, Al-Farabi Kazakh National University, 20, 2, 119-124.
    (https://doi.org/10.18321/ectj690)

  10. Dias, J.R., Baptista-Silva, S., Sousa, A., Oliveira, A.L., Bártolo, P.J., Granja, P.L. (2018). Biomechanical performance of hybrid electrospun structures for skin regeneration. Materials Science and Engineering: C, Elsevier, 93, 816-827.
    (https://doi.org/10.1016/j.msec.2018.08.050)

  11. Fernandes, S.R., Salvador, R., Wenger, C., de Carvalho, M., Miranda, P.C. (2018). Transcutaneous spinal direct current stimulation of the lumbar and sacral spinal cord: a modelling study. Journal of Neural Engineering, IOP Publishing, 15, 3, 036008.
    (https://doi.org/10.1088/1741-2552/aaac38)

  12. Gaspar, F., Cruz, H., Gomes, A. (2018). Evaluation of glue line shear strength of laminated timber structures using block and core type specimens. European Journal of Wood and Wood Products, Springer, 76, 2, 413-425.
    (https://doi.org/10.1007/s00107-017-1217-4)

  13. Gray, J.R.A., Martins-Ferreira, N. (2018). New exactness conditions involving split cubes in protomodular categories. Theory and Applications of Categories, 33, 33, 1031-1058.
    (http://www.tac.mta.ca/tac/volumes/33/33/33-33.pdf)

  14. Horta, J.F., Simões, F.J.P., Mateus, A. (2018). Large scale additive manufacturing of eco-composites. International Journal of Material Forming, Springer, 11, 375-380.
    (https://doi.org/10.1007/s12289-017-1364-5)

  15. Mahendra, V., Kariduraganavar, M.Y., Pattanashetti, N.A., Mitchell, G.R. (2018). The Coconut Tree – A Source of Sustainable Polymeric Materials. United Journal of Biochemistry and Biotechnology, United Prime Publications, 1, 1, 1-6.
    (http://hdl.handle.net/10400.8/8450)

  16. Malça, C., Santos, C., Sena, M., Mateus, A. (2018). Development of SLM cellular structures for injection molds manufacturing. Science and Technology of Materials, Elsevier, 30, 1, 13-22.
    (https://doi.org/10.1016/j.stmat.2018.03.001)

  17. Martins-Ferreira, N., Montoli, A., Sobral, M. (2018). The Nine Lemma and the push forward construction for special Schreier extensions of monoids with operations. Semigroup Forum, Springer, 97, 2, 325-352.
    (https://doi.org/10.1007/s00233-018-9962-1)

  18. Melo-Fonseca, F., Lima, R., Costa, M.M., Bartolomeu, F., Alves, N., Miranda, A., Gasik, M., Silva, F.S., Miranda, G. (2018). 45S5 BAG-Ti6Al4V structures: The influence of the design on some of the physical and chemical interactions that drive cellular response. Materials and Design, Elsevier, 160, 95-105.
    (https://doi.org/10.1016/j.matdes.2018.08.056)

  19. Miragoli, M., Ceriotti, P., Iafisco, M., Vacchiano, M., Salvarani, N., Alogna, A., Carullo P., Ramirez-Rodríguez G.B., Patrício T., Degli Esposti L., Rossi F., Ravanetti F., Pinelli S., Alinovi R., Erreni, M., Rossi, S., Condorelli, G., Post, H., Tampieri, A., Catalucci, D. (2018). Inhalation of peptide-loaded nanoparticles improves heart failure. Science translational medicine, AAAS, 10, 424, eaan6205.
    (https://doi.org/10.1126/scitranslmed.aan6205)

  20. Mitchell, G.R., Olley, R.H. (2018). Orthogonal Templating Control of the Crystallisation of Poly(ε-Caprolactone). Polymer, Elsevier, 137, 19-28.
    (https://doi.org/10.1016/j.polymer.2018.01.068)

  21. Pereira, M., Fernandes, S.R., Miranda, P.C., de Carvalho, M. (2018). Neuromodulation of lower limb motor responses with transcutaneous lumbar spinal cord direct current stimulation. Clinical Neurophysiology, Elsevier, 129, 9, 1999-2009.
    (https://doi.org/10.1016/j.clinph.2018.07.002)

  22. Pereira, R.F., Barrias, C.C., Bártolo, P.J., Granja, P.L. (2018). Cell-instructive pectin hydrogels crosslinked via thiol-norbornene photo-click chemistry for skin tissue engineering. Acta Biomaterialia, Elsevier, 66, 282-293.
    (https://doi.org/10.1016/j.actbio.2017.11.016)

  23. Pereira, R.F., Sousa, A., Barrias, C.C., Bártolo, P.J., Granja, P.L. (2018). A single-component hydrogel bioink for bioprinting of bioengineered 3D constructs for dermal tissue engineering. Materials Horizons, The Royal Society of Chemistry, 5, 6, 1100-1111.
    (https://doi.org/10.1039/C8MH00525G)

  24. Schiariti, V., Longo, E., Shoshmin, A., Kozhushko, L., Besstrashnova, Y., Król, M., Campos, T.N.C., Ferreira, H.N.C., Verissimo, C., Shaba, D., Mwale, M., Amado, S. (2018). Implementation of the International Classification of Functioning, Disability, and Health (ICF) Core Sets for Children and Youth with Cerebral Palsy: Global Initiatives Promoting Optimal Functioning. International Journal of Environmental Research and Public Health, MDPI, 15, 9, 1899.
    (https://doi.org/10.3390/ijerph15091899)

  25. Valente, J.F., Queiroz, J.A., Sousa, F. (2018). p53 as the Focus of Gene Therapy: Past, Present and Future. Current Drug Targets, Bentham Science Publishers, 19, 5, 1801-1817.
    (https://doi.org/10.2174/1389450119666180115165447)

  26. Valente, J.F.A., Sousa, A., Gaspar, V.M., Queiroz, J.A., Sousa, F. (2018). The biological performance of purified supercoiled p53 plasmid DNA in different cancer cell lines. Process Biochemistry, Elsevier, 75, 240-249.
    (https://doi.org/10.1016/j.procbio.2018.09.014)

  27. Zhong, J., Mohan, S.D., Bell, A., Terry, A., Mitchell, G.R., Davis, F.J. (2018). Electrospinning of food-grade nanofibres from whey protein. International Journal of Biological Macromolecules, Elsevier, 113, 764-773.
    (https://doi.org/10.1016/j.ijbiomac.2018.02.113)

Books

2023

  1. Encarnação, T., Pais, A. C. (2023). Marine Organisms: A Solution to Environmental Pollution? Springer. ISBN: 978-3-031-17225-0. (https://link.springer.com/book/10.1007/978-3-031-17226-7)

2022

  1. Almeida, H., Vasco, J., Marto, A., Capela, C., Craveiro, F., Bártolo, H., Coelho, L., Correia, M., Vieira, M., Ruben, R. B. (2022). Progress in Digital and Physical Manufacturing: Proceedings of ProDPM’21. Springer Nature. ISBN: 978-3-031-33892-2. (https://doi.org/10.1007/978-3-031-33890-8)

2021

  1. Pereira, A. M., Simões, F. J. P., Sá, J. C., Ferreira, I., Martinho, P. G. (2021). International Conference on Quality, Innovation and Sustainability – ICQIS2020- Book of Abstracts. Polytechnic of Leiria – School of Engineering and Management. ISBN: 978-989-54819-2-7. (https://icqis.ipleiria.pt/files/2021/04/ICQIS2020_book_of_abstracts.pdf)
  2. Rodrigues, H., Gaspar, F., Fernandes, P., Mateus, A. (2021). Sustainability and Automation in Smart Constructions: Proceedings of the International Conference on Automation Innovation in Construction (CIAC-2019). Springer International Publishing. ISBN: 978-3-030-35532-6. (https://doi.org/10.1007/978-3-030-35533-3)
  3. Capela, C., Correia, M., Ruben, R. B. (2021). Livro de Resumos do 12º Congresso Nacional de Mecânica Experimental, CNME2020. ESTG, Leiria. ISBN: 978-972-8415-06-8. (https://doi.org/10.25766/vnbn-a964)

2020

  1. Rodrigues, H., Gaspar, F., Fernandes, P., Mateus, A. (2020). Sustainability and automation in smart construction – Proceedings of the International Conference on Automation Innovation in Construction (CIAC-2019). Springer. ISBN: 978-3-030-35533-3 (eBook). (https://doi.org/10.1007/978-3-030-35533-3)

2019

  1. Silva, G., Ferreira, M. P., Ferreira, V., Trovão, C. (2019). Estudo do estado da arte do empreendedorismo, Projeto Empreender Leiria. NERLEI Associação Empresarial da Região de Leiria. (http://empreenderleiria.pt/publicfiles/zroiuxgenog7svj6qse42tdabt4drpjslo2fapig.pdf)

2018

  1. Mitchell, G., Faria-Pascoal, P. (2018). Rosin – an untapped green resource for the future for Portugal. IPL – CDRSP Knowledge Series (vol.3). ISBN: 978-972-8793-55-5.
  2. Mitchell, G., Faria-Pascoal, P. (2018). XESA – X-Ray Experimental Structural Analysis for Polymers. IPL – CDRSP Knowledge Series (vol.4). ISBN: 978-989-96765-3-4.
  3. Mitchell, G., Faria-Pascoal, P. (2018). MESA – Molecular Editor for Structural Analysis Reference Manual. IPL – CDRSP Knowledge Series (vol.5). ISBN: 978-989-96765-6-5.
  4. Mitchell, G. (2018). Scattering Methods for Polymer Orientation Characterisation. Springer.
  5. Mitchell, G. (2018). Nanoenhancers for Plastics. Pan Stanford. ISBN: 978-981-4411-52-3.
  6. Fernandes, P.R., Tavares, J. M. R. S., Folgado, J., Quental, C., Ruben, R. B. (2018). Book of abstracts of the 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization, CMBBE2019. ISBN: 978-989-99424-5-5.

Our Location

CDRSP
Rua de Portugal – Zona Industrial
2430-028 – Marinha Grande
PORTUGAL

Contacts

+351 244 569 441
cdrsp@ipleiria.pt

Social Network

Linkedin Facebook Youtube

© Centre for Rapid and Sustainable Product Development

Developed by popdigit.com