Papers
International
2022
- Trindade, D.; Alves, N.; Moura, C. From Animal to Human: (Re)using Acellular Extracellular Matrices for Temporomandibular Disc Substitution. J. Funct. Biomater. 2022, 13, 61.
- Silva, R.; Veloso, A.; Alves, N.; Fernandes, C.; Morouço, P. A Review of Additive Manufacturing Studies for Producing Customized Ankle-Foot Orthoses. Bioengineering 2022, 9, 249.
- Cordeiro, R.; Henriques, M.; Silva, J.C.; Antunes, F.; Alves, N.; Moura, C. Corncob Cellulose Scaffolds: A New Sustainable Temporary Implant for Cartilage Replacement. J. Funct. Biomater. 2022, 13, 63.
- Meneses, J., Fernandes, S., Alves, N. et al. How to correctly estimate the electric field in capacitively coupled systems for tissue engineering: a comparative study. Sci Rep 12, 11049 (2022).
- Carreira, P.; Gatões, D.; Alves, N.; Ramos, A.S.; Vieira, M.T. Searching New Solutions for NiTi Sensors through Indirect Additive Manufacturing. Materials 2022, 15, 5007.
- Biscaia, S.; Silva, J.C.; Moura, C.; Viana, T.; Tojeira, A.; Mitchell, G.R.; Pascoal-Faria, P.; Ferreira, F.C.; Alves, N. Additive Manufactured Poly(ε-caprolactone)-graphene Scaffolds: Lamellar Crystal Orientation, Mechanical Properties and Biological Performance. Polymers 2022, 14, 1669.
- Meneses, J., Fernandes, S., Alves, N. et al. Author Correction: How to correctly estimate the electric field in capacitively coupled systems for tissue engineering: a comparative study. Sci Rep 12, 12522 (2022).
- M.M. Costa, R. Lima, N. Alves, N.A. Silva, M. Gasik, F.S. Silva, F. Bartolomeu, G. Miranda, Multi-material cellular structured orthopedic implants design: In vitro and bio-tribological performance, Journal of the Mechanical Behavior of Biomedical Materials, Volume 131, 2022, 105246, ISSN 1751-6161.
- Braga, R.; Rodrigues, P.F.; Cordeiro, H.; Carreira, P.; Vieira, M.T. The Study of New NiTi Actuators to Reinforce the Wing Movement of Aircraft Systems. Materials 2022, 15, 4787.
- Biscaia, S.; Branquinho, M.V.; Alvites, R.D.; Fonseca, R.; Sousa, A.C.; Pedrosa, S.S.; Caseiro, A.R.; Guedes, F.; Patrício, T.; Viana, T.; Mateus, A.; Maurício, A.C.; Alves, N. 3D Printed Poly(𝜀-caprolactone)/Hydroxyapatite Scaffolds for Bone Tissue Engineering: A Comparative Study on a Composite Preparation by Melt Blending or Solvent Casting Techniques and the Influence of Bioceramic Content on Scaffold Properties. Int. J. Mol. Sci. 2022, 23, 2318.
- Ferreira, C.A.M.; Guerreiro, S.F.C.; Valente, J.F.A.; Patrício, T.M.F.; Alves, N.; Mateus, A.; Dias, J.R. Advanced Face Mask Filters Based on PCL Electrospun Meshes Dopped with Antimicrobial MgO and CuO Nanoparticles. Polymers 2022, 14, 3329.
- Pereira, M.R., Silva, G., Semiao, V., Silverio, V., Martins, J.N.R., Pascoal-Faria, P., Alves, N., Dias, J.R. and Ginjeira, A. (2022), Experimental validation of a computational fluid dynamics model using micro-particle image velocimetry of the irrigation flow in confluent canals. Int Endod J. Accepted Author Manuscript.
- Veiga, A.; Magalhães, R.; Duarte, M.M.; Dias, J.R.; Alves, N.M.; Costa-Pinto, A.R.; Castro, F.; Rocha, F.; Oliveira, A.L. Continuous Production of Highly Tuned Silk/Calcium-Based Composites: Exploring New Pathways for Skin Regeneration. Molecules 2022, 27, 2249.
- Pereira, D.; Carreira, T.S.; Alves, N.; Sousa, Â.; Valente, J.F.A. Metallic Structures: Effective Agents to Fight Pathogenic Microorganisms. Int. J. Mol. Sci. 2022, 23, 1165.
- Reis, T.; Barbosa, C.; Franco, M.; Baptista, C.; Alves, N.; Castelo-Baz, P.; Martin-Cruces, J.; Martin-Biedma, B. 3D-Printed Teeth in Endodontics: Why, How, Problems and Future—A Narrative Review. Int. J. Environ. Res. Public Health 2022, 19, 7966.
- Santos, T.; Ramani, M.; Devesa, S.; Batista, C.; Franco, M.; Duarte, I.; Costa, L.; Ferreira, N.; Alves, N.; Pascoal-Faria, P. Additive Manufactured Stoneware Fired in Microwave Furnace. Mater. Proc. 2022, 8, 145.
- Augusto, A., Miranda, A., Costa, L., Pinheiro, J., Campos, M. J., Raimundo, D., Pedrosa, R., Mitchell, G., Niranjan, K., Silva, S. F. (2022). A pilot plant scale testing of the application of seaweed-based natural coating and modified atmosphere packaging for shelf-life extension of fresh-cut apple. Journal of Food Processing and Preservation, 46, e16630.
- Silva, D.P.d.; Lamolinara, B.; Costa, A.; Gameiro, F.; Pascoal-Faria, P.; Mateus, A.; Martinez, J.C.; Phinyocheep, P.; Amornsakchai, T.; Mitchell, G.R. Measuring In-Situ X-ray Scattering of Natural Rubber Biaxial Deformation: A New Equipment for Polymer Studies. Mater. Proc. 2022, 8, 136.
- Reeves, S.J.; Davis, F.J.; Mitchell, G.R. Ferronematic Liquid Crystal Polymers and Elastomers. Mater. Proc. 2022, 8, 135.
2021
- Valente, J.F.A., Queiroz, J.A., Sousa, F. (2021). Dilemma on plasmid DNA purification: binding capacity vs selectivity, Journal of Chromatography A, vol. 1637, 461848, Elsevier.
- Silva, J.C., Moura, C.S., Borrecho, G., Alves de Matos, A.P., Cabral, J.M., Linhardt, R.J., Ferreira, F.C. (2021). Effects of glycosaminoglycan supplementation in the chondrogenic differentiation of bone marrow- and synovial- derived mesenchymal stem/stromal cells on 3D-extruded poly (ε-caprolactone) scaffolds, International Journal of Polymeric Materials and Polymeric Biomaterials, vol. 70(3), 207-222, Taylor & Francis.
- Baptista-Silva, S., Borges, S., Costa-Pinto, A.R., Costa, R., Amorim, M., Dias, J.R., Ramos, Ó., Alves, P., Granja, P.L., Soares, R., Pintado, M., Oliveira, A.L. (2021). In situ forming silk sericin-based hydrogel: A novel wound healing biomaterial, ACS Biomaterials Science & Engineering, vol. 7(4), 1573-1586, ACS Publications.
- Ferreira, C.A., Félix, R., Félix, C., Januário, A.P., Alves, N., Novais, S.C., Dias, J.R., Lemos, M.F. (2021). A Biorefinery Approach to the Biomass of the Seaweed Undaria pinnatifida (Harvey Suringar, 1873): Obtaining Phlorotannins-Enriched Extracts for Wound Healing, Biomolecules, vol. 11(3), 461, MDPI.
- Sousa, R., Batalha, N., Silva, V., Rodrigues, H. (2021). Seismic fragility functions for Portuguese RC precast buildings, Bulletin of Earthquake Engineering, Springer.
- Bernardo, V., Sousa, R., Candeias, P., Costa, A., Campos Costa, A. (2021). Historic Appraisal Review and Geometric Characterization of Old Masonry Buildings in Lisbon for Seismic Risk Assessment, International Journal of Architectural Heritage, 1-21, Taylor & Francis.
- Pires, T., Santos, J., Ruben, R.B., Gouveia, B.P., Castro, A.P., Fernandes, P.R. (2021). Numerical-experimental analysis of the permeability-porosity relationship in triply periodic minimal surfaces scaffolds, Journal of Biomechanics, vol. 117, 110263, Elsevier.
- Morouço, P., Fernandes, C., Lattanzi, W. (2021). Challenges and innovations in osteochondral regeneration: insights from biology and inputs from bioengineering towards the optimization of tissue engineering strategies, Journal of Functional Biomaterials, vol. 12(1), 17, MDPI.
- Martins-Ferreira, N., Sobral, M. (2021). Schreier split extensions of preordered monoids, Journal of Logical and Algebraic Methods in Programming, vol. 120, 100643, Elsevier.
- Guerreiro, S.F., Valente, J.F., Dias, J.R., Alves, N. (2021). Box-Behnken Design a Key Tool to Achieve Optimized PCL/Gelatin Electrospun Mesh, Macromolecular Materials and Engineering, vol. 306(4), 2000678, Wiley.
- Silva, M.R., Pereira, A.M., Sampaio, Á.M., Pontes, A.J. (2021). Assessment of the Dimensional and Geometric Precision of Micro-Details Produced by Material Jetting, Materials, vol. 14(8), 1989, MDPI.
- Patrício, T.M.F., Mumcuoglu, D., Montesi, M., Panseri, S., Witte-Bouma, J., Garcia, S.F., Sandri, M., Tampieri, A., Farrell, E., Sprio, S. (2021). Bio-inspired polymeric iron-doped hydroxyapatite microspheres as a tunable carrier of rhBMP-2, Materials Science and Engineering: C, vol. 119, 111410, Elsevier.
- Auriemma, F., de Ballesteros, O.R., Giusto, G., Di Girolamo, R., Malafronte, A., Scoti, M., Rosa, C., Mitchell, G.R. (2021). Time-resolving small angle X-Ray scattering analysis of melt crystallization of mixtures of regular and irregular isotactic polypropylene samples, Polymer, vol. 215, 123411, Elsevier.
- Silva, M.R., Dias-de-Oliveira, J.A., Pereira, A.M., Alves, N.M., Sampaio, Á.M., Pontes, A.J. (2021). Design of Kinematic Connectors for Microstructured Materials Produced by Additive Manufacturing, Polymers, vol. 13(9), 1500, MDPI.
- Valente, J.F.A., Pereira, P., Sousa, A., Queiroz, J.A., Sousa, F. (2021). Effect of Plasmid DNA Size on Chitosan or Polyethyleneimine Polyplexes Formulation, Polymers, vol. 13(5), 793, MDPI.
- Santos, R.F., Farinha, A.R., Rocha, R., Batista, C., Vieira, M.T. (2021). High‑speed machining tool-steel chips as an outstanding raw material for indirect additive manufacturing?, Results in Materials, 100207, Elsevier.
- Alvites, R.D., Branquinho, M.V., Sousa, A.C., Amorim, I., Magalhães, R., João, F., Almeida, D., Amado, S., Prada, J., Pires, I., Zen, F., Raimondo, S., Luís, A.L., Geuna, S., Varejão, A.S.P., Maurício, A. (2021). Combined use of chitosan and olfactory mucosa mesenchymal stem/stromal cells to promote peripheral nerve regeneration in vivo, Stem cells international, vol. 2021, 6613029, Hindawi.
- Rodrigues, H., Vitorino, H., Batalha, N., Sousa, R., Fernandes, P., Varum, H. (2021). Influence of Beam-to-Column Connections in the Seismic Performance of Precast Concrete Industrial Facilities, Structural Engineering International, 1-13, Taylor & Francis.
- Martinho, P.G., Pouzada, A.S. (2021). Alternative materials in moulding elements of hybrid moulds: structural integrity and tribological aspects, International Journal of Advanced Manufacturing Technology, vol. 113(1), 351-363, Springer.
- Duarte, M.M., Ribeiro, N., Silva, I.V., Dias, J.R., Alves, N.M., Oliveira, A.L. (2021). Fast Decellularization Process Using Supercritical Carbon Dioxide for Trabecular Bone, Journal of Supercritical Fluids, vol. 172, 105194, Elsevier.
- Valente, J.F.A., Sousa, F., Alves, N. (2021). Additive Manufacturing Tools to Improve the Performance of Chromatographic Approaches, Trends in Biotechnology, vol. 39(10), 970-973, Elsevier.
- Sordini, L., Silva, J.C., Garrudo, F.F.F., Rodrigues, C.A.V., Marques, A.C., Linhardt, R.J., Cabral, J.M.S., Morgado, J., Ferreira, F.C. (2021). PEDOT:PSS-Coated Polybenzimidazole Electroconductive Nanofibers for Biomedical Applications, Polymers, vol. 13(16), 2786, MDPI.
- Batista, C.D., Fernandes, A., Vieira, M.T., Emadinia, O. (2021). From Machining Chips to Raw Material for Powder Metallurgy-A Review, Materials, vol. 14(18), 5432, MDPI.
- Ângelo, D.F., Araújo, R.A.D., Sanz, D. (2021). Surgical complications related to temporomandibular joint arthroscopy: a prospective analysis of 39 single-portal versus 43 double-portal procedures, International Journal of Oral and Maxillofacial Surgery, vol. 50(8), 1089-1094, Elsevier.
- Simões, T., Ferreira, J., Lemos, M.F.L., Augusto, A., Félix, R., Silva, S.F.J., Ferreira-Dias, S., Tecelão, C. (2021). Argan Oil as a Rich Source of Linoleic Fatty Acid for Dietetic Structured Lipids Production, Life, vol. 11(11), 1114, MDPI.
- Ostetto, L., Sousa, R., Rodrigues, H., Fernandes, P. (2021). Assessment of the Seismic Behavior of a Precast Reinforced Concrete Industrial Building with the Presence of Horizontal Cladding Panels, Buildings, vol. 11(9), 400, MDPI.
- Ângelo, D.F., Wang, Y., Morouço, P., Monje, F., Mónico, L., González-Garcia, R., Moura, C., Alves, N., Sanz, D., Gao, J., Sousa, R. (2021). A randomized controlled preclinical trial on 3 interposal temporomandibular joint disc implants: TEMPOJIMS—Phase 2, Journal of Tissue Engineering and Regenerative Medicine
- Trindade, D., Cordeiro, R., José, H.C., Ângelo, D.F., Alves, N., Moura, C. (2021). Biological Treatments for Temporomandibular Joint Disc Disorders: Strategies in Tissue Engineering, Biomolecules, vol. 11(7), 933, MDPI.
- Vallejo, M., Cordeiro, R., Dias, P.A., Moura, C., Henriques, M., Seabra, I.J., Malça, C.M., Morouço, P. (2021). Recovery and evaluation of cellulose from agroindustrial residues of corn, grape, pomegranate, strawberry-tree fruit and fava, Bioresources and Bioprocessing, 8(1), 1-12, Springer.
- Ferreira, C.A., Januário, A.P., Félix, R., Alves, N., Lemos, M.F., Dias, J.R. (2021). Multifunctional Gelatin/Chitosan Electrospun Wound Dressing Dopped with Undaria pinnatifida Phlorotannin-Enriched Extract for Skin Regeneration, Pharmaceutics, vol. 13(12), MDPI, 2152.
- Mateus, J.C., Lopes, C.D.F., Aroso, M., Costa, A.R., Gerós, A., Meneses, J., Faria, P., Neto, E., Lamghari, M., Sousa, M.M., Aguiar, P. (2021). Bidirectional flow of action potentials in axons drives activity dynamics in neuronal cultures, Journal of Neural Engineering, vol. 18(6), 066045, IOP Publishing.
- Pires, J.N., Azar, A.S., Nogueira, F., Zhu, C.Y., Branco, R., Tankova, T. (2021). The role of robotics in additive manufacturing: review of the AM processes and introduction of an intelligent system, Industrial Robot, vol. 49(2), 311-331, Emerald Publishing.
- Santos, C., Gatões, D., Cerejo, F., Vieira, M.T. (2021). Influence of Metallic Powder Characteristics on Extruded Feedstock Performance for Indirect Additive Manufacturing, Materials, vol. 14(23), 7136, MDPI.
- Pimenta, S., Silva, C.G., Flora, S., Hipólito, N., Burtin, C., Oliveira, A., Morais, N., Brites-Pereira, M., Carreira, B.P., Januário, F. and Andrade, L. (2021). What Motivates Patients with COPD to Be Physically Active? A Cross-Sectional Study, Journal of Clinical Medicine, vol. 10(23), 5631, MDPI.
- Derdar, H., Meghabar, R., Benachour, M., Mitchell, G.R., Bachari, K., Belbachir, M., Cherifi, Z., Baghdadli, M.C. and Harrane, A. (2021). Polymer-Clay Nanocomposites: Exfoliation and Intercalation of Organophilic Montmorillonite Nanofillers in Styrene–Limonene Copolymer, Polymer Science, Series A, vol. 63(5), 568-575, Springer.
2020
- Gkourmpis, T., Mitchell, G.R. (2020). The Use of Scattering Data in the Study of the Molecular Organisation of Polymers in the Non-Crystalline State, Polymers, vol. 12(12), 2917, MDPI.
- Bartolomeu, F., Costa, M.M., Alves, N., Miranda, G., Silva, F.S. (2020). Additive manufacturing of NiTi-Ti6Al4V multi-material cellular structures targeting orthopedic implants, Optics and Lasers in Engineering, vol. 134, 106208, Elsevier.
- Pereira, T., Barroso, S., Mendes, S., Amaral, R.A., Dias, J.R., Baptista, T., Saraiva, J.A., Alves, N.M., Gil, M.M. (2020). Optimization of phycobiliprotein pigments extraction from red algae Gracilaria gracilis for substitution of synthetic food colorants, Food Chemistry, vol. 321, 126688, Elsevier.
- Bartolomeu, F., Costa, M.M., Alves, N., Miranda, G., Silva, F.S. (2020). Engineering the elastic modulus of NiTi cellular structures fabricated by selective laser melting, Journal of the Mechanical Behavior of Biomedical Materials, vol. 110, 103891, Elsevier.
- Martins-Ferreira, N., Montoli, A., Patchkoria, A., Sobral, M. (2020). On the classification of Schreier extensions of monoids with non-abelian kernel, Forum Mathematicum, vol. 32(3), 607-623, Degruyter.
- Dias, J.R., Ribeiro, N., Baptista-Silva, S., Costa-Pinto, A.R., Alves, N., Oliveira, A.L. (2020). In situ Enabling Approaches for Tissue Regeneration: Current Challenges and New Developments, Frontiers in Bioengineering and Biotechnology, vol. 8, 85, Frontiers Media S.A.
- Moura, C., Trindade, D., Vieira, M., Francisco, L., Ângelo, D.F., Alves, N. (2020). Multi-Material Implants for Temporomandibular Joint Disc Repair: Tailored Additive Manufacturing Production, Frontiers in Bioengineering and Biotechnology, vol. 8, 342, Frontiers Media S.A.
- Amorim, P.H., Moraes, T.F., Silva, J.V., Pedrini, H., Ruben, R.B. (2020). Reconstruction of Panoramic Dental Images Through Bézier Function Optimization, Frontiers in Bioengineering and Biotechnology, vol. 8, 794, Frontiers Media S.A.
- Ruiz-Navarro, J.J., Morouço, P.G., Arellano, R. (2020). Relationship Between Tethered Swimming in a Flume and Swimming Performance, International Journal of Sports Physiology and Performance, vol. 15(8), 1087-1094, Human Kinetics.
- Valente, J.F.A., Sousa, A., Azevedo, G.A., Queiroz, J.A., Sousa, F. (2020). Purification of supercoiled p53-encoding plasmid using an arginine-modified macroporous support, Journal of Chromatography A, vol. 1618, 460890, Elsevier.
- Valente, J.F.A., Queiroz, J.A., Sousa, F. (2020). Dilemma on plasmid DNA purification: binding capacity vs selectivity, Journal of Chromatography A, vol. 1637, 461848, Elsevier.
- Bartolomeu, F., Dourado, N., Pereira, F., Alves, N., Miranda, G., Silva, F.S. (2020). Additive manufactured porous biomaterials targeting orthopedic implants: A suitable combination of mechanical, physical and topological properties, Materials Science and Engineering: C, vol. 107, 110342, Elsevier.
- Premakshi, H.G., Kariduraganavar, M.Y., Mitchell, G.R. (2020). Crosslinked Nanocomposite Sodium Alginate-Based Membranes with Titanium Dioxide for the Dehydration of Isopropanol by Pervaporation, Molecules, vol. 25(6), 1298, MDPI.
- Silva, J.C., Moura, C.S., Borrecho, G., de Matos, A.P.A., da Silva, C.L., Cabral, J.M., Bártolo, P.J., Linhardt, R.J., Ferreira, F.C. (2020). Extruded Bioreactor Perfusion Culture Supports the Chondrogenic Differentiation of Human Mesenchymal Stem/Stromal Cells in 3D Porous Poly(ε-Caprolactone) Scaffolds, Biotechnology Journal, vol. 15(2), 1900078, Wiley.
- Derdar H., Mitchell G.R., Mahendra V.S., Benachour M., Haoue S., Cherifi Z., Bachari K., Harrane A., Meghabar R. (2020). Green Nanocomposites from Rosin-Limonene Copolymer and Algerian Clay, Polymers, vol. 12(9), 1971, MDPI.
- Santos, T., Hennetier, L., Costa, V.A., Costa, L.C. (2020). Microwave vs conventional porcelain firing: Macroscopic properties, International Journal of Applied Ceramic Technology, vol. 17(5), 2277-2285, Wiley.
- Solla, M., Gonçalves, L., Gonçalves, G., Francisco, C., Puente, I., Providência, P., Florindo, G., Rodrigues, H. (2020). A building information modeling approach to integrate geomatic data for the documentation and preservation of cultural heritage, Remote Sensing, vol. 12(24), 4028, MDPI.
- Martins-Ferreira, N. (2020). A Unified Classification Theorem for Mal’tsev-Like Categories, Applied Categorical Structures, vol. 28(2), 323-338, Springer.
- Audenaert, E.A., Van den Eynde, J., de Almeida, D.F., Steenackers, G., Vandermeulen, D., Claes, P. (2020). Separating positional noise from neutral alignment in multicomponent statistical shape models, Bone Reports, vol. 12, 100243, Elsevier.
- Reboleira, J., Adão, P., Guerreiro, S.F., Dias, J.R., Ganhão, R., Mendes, S., Andrade, M., Vilarinho, F., Sanches-Silva, A., Mateus, A., Alves, N., Bernardino, S. (2020). Poultry Shelf-Life Enhancing Potential of Nanofibers and Nanoparticles Containing Porphyra dioica Extracts, Coatings, vol. 10(4), 315, MDPI.
- Silva, J.C., Carvalho, M.S., Udangawa, R.N., Moura, C.S., Cabral, J.M.S., L da Silva, C., Ferreira, F.C., Vashishth, D., Linhardt, R.J. (2020). Extracellular matrix decorated polycaprolactone scaffolds for improved mesenchymal stem/stromal cell osteogenesis towards a patient-tailored bone tissue engineering approach, Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 108(5), 2153-2166, Wiley.
- Moura, C.S., Silva, J.C., Faria, S., Fernandes, P.R., da Silva, C.L., Cabral, J.M.S., Linhardt, R., Bártolo, P.J., Ferreira, F.C. (2020). Chondrogenic differentiation of mesenchymal stem/stromal cells on 3D porous poly (ε-caprolactone) scaffolds: Effects of material alkaline treatment and chondroitin sulfate supplementation, Journal of Bioscience and Bioengineering, vol. 129(6), 756-764, Elsevier.
- Pattanashetti, N.A., Viana, T., Alves, N., Mitchell, G.R., Kariduraganavar, M.Y. (2020). Development of novel 3D scaffolds using BioExtruder by varying the content of hydroxyapatite and silica in PCL matrix for bone tissue engineering, Journal of Polymer Research, vol. 27(4), 1-13, Springer.
- Figueiredo, L., Fonseca, R., Pinto, L.F.V., Ferreira, F.C., Almeida, A., Rodrigues, A. (2020). Strategy to improve the mechanical properties of bioabsorbable materials based on chitosan for orthopedic fixation applications, Journal of the Mechanical Behavior of Biomedical Materials, vol. 103(), 103572, Elsevier.
- Carreira, P., Cerejo, F., Alves, N., Vieira, M.T. (2020). In Search of the Optimal Conditions to Process Shape Memory Alloys (NiTi) Using Fused Filament Fabrication (FFF), Materials, vol. 13(21), 4718, MDPI.
- Zaoui, A., Mahendra, V., Mitchell, G., Cherifi, Z., Harrane, A., Belbachir, M. (2020). Design, Synthesis and Thermo-chemical Properties of Rosin Vinyl Imidazolium Based Compounds as Potential Advanced Biocompatible Materials, Waste and Biomass Valorization, vol. 11(7), 3723-3730, Springer.
- Derdar, H., Mitchell, G.R., Cherifi, Z., Belbachir, M., Benachour, M., Meghabar, R., Bachari, K., Harrane, A. (2020). Ultrasound Assisted Synthesis of Polylimonene and Organomodified-clay Nanocomposites: A Structural, Morphological and Thermal Properties, Bulletin of Chemical Reaction Engineering & Catalysis, vol. 15(3), 798-807, Universitas Diponegoro.
- Meneses, J., Silva, J.C., Fernandes, S.R., Datta, A., Ferreira, F.C., Moura, C., Amado, S., Alves, N., Pascoal-Faria, P. (2020). A Multimodal Stimulation Cell Culture Bioreactor for Tissue Engineering: A Numerical Modelling Approach, Polymers, vol. 12(4), 940, MDPI.
- Morouço, P., Azimi, B., Milazzo, M., Mokhtari, F., Fernandes, C., Reis, D., Danti, S. (2020). Four-Dimensional (Bio-) printing: A Review on Stimuli-Responsive Mechanisms and Their Biomedical Suitability, Applied Sciences, vol. 10(24), 9143, MDPI.
- Vincze, G., Simões, F.J.P., Butuc, M.C. (2020). Asymmetrical Rolling of Aluminum Alloys and Steels: A Review, Metals, vol. 10(9), 1126, MDPI.
- Luciano De Sio, Bin Ding, Monica Focsan, Karin Kogermann, Paula Pascoal-Faria, Francesca Petronela, Geoffrey Mitchell, Eyal Zussman, Filippo Pierin (2020). Personalized Reusable Face Masks with Smart Nano-Assisted Destruction of Pathogens for COVID-19: A Visionary Road, Chemistry – A European Journal, vol. 27, 6112, Wiley.
2019
- Moura, Carla; Santos-Rocha, Rita; Franco, Susana; Malça, Cândida; Galhano, Cristina; Henriques, Marta; Morouço, Pedro (2019). A Brief Review on Processes for Cartilage Repair, Applied Mechanics and Materials, vol. 890, 229-236, Trans Tech Publications.
- Diana A. Fonseca, Fábio Simões (2019). Direct Digital Manufacturing in the Context of a Circular Economy, Applied Mechanics and Materials, vol. 890, 21-33, Trans Tech Publications.
- Pascoal-Faria, Paula; Castelo Ferreira, Pedro; Datta, Abhishek; Amado, Sandra; Moura, Carla; Alves, Nuno (2019). Electrical Stimulation Optimization in Bioreactors for Tissue Engineering Applications, Applied Mechanics and Materials, vol. 890, 314-323, Trans Tech Publications.
- Pedro Castelo Ferreira; Paula Pascoal-Faria; Pedro Carreira; Nuno Alves (2019). A Computer Simulation of the Nitinol Thermal Expansion under Fast Varying Working Conditions, Applied Mechanics and Materials, vol. 890, 162-173, Trans Tech Publications.
- Gaspar, M., Pascoal-Faria, P., Amado, S., & Alves, N. (2019). A Computer Tool for 3D Shape Recovery of Fruits, Applied Mechanics and Materials, vol. 890, 181-189, Trans Tech Publications.
- Viana, T., Biscaia, S., Dabrowska, E., Franco, M. C., Carreira, P., Morouço, P., & Alves, N. (2019). A novel biomanufacturing system to produce multi-material scaffolds for tissue engineering: Concept and preliminary results, Applied Mechanics and Materials, vol. 890, 283-289, Trans Tech Publications.
- Geoffrey Robert, Mitchell (2019). Adaptive Platforms and Flexible Deposition System for Big Area Additive Manufacturing (BAAM), Applied Mechanics and Materials, vol. 890, 3-20, Trans Tech Publications.
- Vasconcelos, I., Pereira, M. R., Ginjeira, A., Franco, M. C., Morouço, P., & Alves, N. (2019). Evaluation of Root Canal Filling with a Bioceramic Sealer Using Micro-Computed Tomography: A Pilot Study, Applied Mechanics and Materials, vol. 890, 275-282, Trans Tech Publications.
- Ferreira, V. and Lisboa, A. (2019). Innovation and Entrepreneurship: from Schumpeter to Industry 4.0, Applied Mechanics and Materials, vol. 890, 174-180, Trans Tech Publications.
- Koutsonas, S., Mitchell, G. R., & Davis, F. J. (2019). Microwave treatment of polyacrylonitrile powder method development and effects of surface modification porosity for supercapacitor devices or other mobile applications, Applied Mechanics and Materials, vol. 890, 146-154, Trans Tech Publications.
- Gomes, S., Pascoal-Faria, P., Mitchell, G. R., Gkourmpis, T., & Youngs, T. (2019). Numerical Thermal Analysis of a T Jump System Used for Studying Polymer Behaviour, Applied Mechanics and Materials, vol. 890, 155-161, Trans Tech Publications.
- Mitchell, G. R., Pratumshat, S., & Olley, R. (2019). Polyethylene and the Nucleating Agent: Dibenzylidene Sorbitol, a Neutron Scattering Study, Applied Mechanics and Materials, vol. 890, 199-204, Trans Tech Publications.
- Sousa, D., Biscaia, S., Viana, T., Gaspar, M., Mahendra, V., Mohan, S. D., … & Mitchell, G. R. (2019). Rosin Based Composites for Additive Manufacturing, Applied Mechanics and Materials, vol. 890, 70-76, Trans Tech Publications.
- Rui Silva, Ivo Santos Dimas, Justin W. Fernandez, Nuno Alves, Pedro Morouço, Ana Colette Maurício, António Veloso, Sandra Amado (2019). Sheep Gait Biomechanics and the Assessment of Musculoskeletal Conditions: A Systematic Review, Applied Mechanics and Materials, vol. 890, 248-259, Trans Tech Publications.
- Fernandes, C., Heggannavar, G. B., Kariduraganavar, M. Y., Mitchell, G. R., Alves, N., & Morouço, P. (2019). Smart Materials for Biomedical Applications: The Usefulness of Shape-Memory Polymers, Applied Mechanics and Materials, vol. 890, 237-247, Trans Tech Publications.
- Heggannavar, G. B., Achari, D., Fernandes, C., Mitchell, G. R., Morouço, P., & Kariduraganavar, M. Y. (2019). Smart polymers in drug delivery applications, Applied Mechanics and Materials, vol. 890, 324-339, Trans Tech Publications.
- Khan, I., Kamma-Lorger, C. S., Mohan, S. D., Mateus, A., & Mitchell, G. R. (2019). The Exploitation of Polymer Based Nanocomposites for Additive Manufacturing: A Prospective Review, Applied Mechanics and Materials, vol. 890, 113-145, Trans Tech Publications.
- Brites, Fernando; Malça, Cândida; Gaspar, Florindo; Horta, João F.; Franco, Margarida C.; Biscaia, Sara; Mateus, Artur (2019). The Use of Polypropylene and High-Density Polyethylene on Cork Plastic Composites for Large Scale 3D Printing, Applied Mechanics and Materials, vol. 890, 205-225, Trans Tech Publications.
- Nelson Martins-Ferreira; Nuno Alves; Geoffrey R. Mitchell (2019). Towards a Conceptual Notion for a Universal Printing Machine, Applied Mechanics and Materials, vol. 890, 61-69, Trans Tech Publications.
- Franco, M. C., Fonseca, R., Gomes, S., Biscaia, S., Brites, F., Pascoal-Faria, P., & Mateus, A. (2019). Traffic Vertical Signposting: Materials Characterization and Structural Numerical Simulation, Applied Mechanics and Materials, vol. 890, 190-198, Trans Tech Publications.
- Silva, M.R., Domingues, J., Costa, J., Mateus, A., Malça, C. (2019). Study of Metal/Polymer Interface of Parts Produced by a Hybrid Additive Manufacturing Approach, Applied Mechanics and Materials, vol. 890, 34-42, Trans Tech Publications.
- Freitas, P., Santos, C., Carreira, P., Mateus, A. (2019). High Efficiency Cooling and Heating Channels for Injection Moulding, Applied Mechanics and Materials, vol. 890, 43-53, Trans Tech Publications.
- Vitorino, J., Ribeiro, E., Silva, R., Santos, C., Carreira, P., Mitchell, G., Mateus, A. (2019). Industry 4.0 – Digital Twin Applied to Direct Digital Manufacturing, Applied Mechanics and Materials, vol. 890, 54-60, Trans Tech Publications.
- Mahendra, V. (2019). Rosin Product Review, Applied Mechanics and Materials, vol. 890, 77-91, Trans Tech Publications.
- Mohan, S.D., Nazhipkyzy, M., Carreira, P., Santos, C., Davis, F.J., Mateus, A., Mitchell, G. (2019). Direct Digital Manufacturing of Nanocomposites, Applied Mechanics and Materials, vol. 890, 92-97, Trans Tech Publications.
- Baptista, C., Martins, G., Santos, C., Mateus, A., Antunes, F. (2019). Microstructure of Thermoplastic Composites Reinforced with Wool and Wood, Applied Mechanics and Materials, vol. 890, 98-112, Trans Tech Publications.
- Silva, A. R., Carreira, P., Santos, C., Reis, M., Mateus, A. (2019). I. Film: Using Electrospinning to Create Bioactive Films, Applied Mechanics and Materials, vol. 890, 260-267, Trans Tech Publications.
- Reis, D., Biscaia, S., Seabra, I. J., Veloso, A., Morouço, P. (2019). Fabrication of Poly(Glycerol Sebacate)-Poly(ε-Caprolactone) Extrusion-Based Scaffolds for Cartilage Regeneration, Applied Mechanics and Materials, vol. 890, 268-174, Trans Tech Publications.
- Lopes, J., Fonseca, R., Viana, T., Fernandes, C., Morouço, P., Moura, C., Biscaia, S. (2019). Characterization of Biocompatible Poly(Ethylene Glycol)-Dimethacrylate Hydrogels for Tissue Engineering, Applied Mechanics and Materials, vol. 890, 290-300, Trans Tech Publications.
- Gordo, J. J., Pascoal-Faria, P., Mateus, A., Morouço, P., Schiriati, V., Amado, S. (2019). Biomechanical Outcomes Related with Gait in Children with Cerebral Palsy Using Ankle-Foot Orthotic – A Systematic Review, Applied Mechanics and Materials, vol. 890, 301-313, Trans Tech Publications.
- Azevedo, G.M.; Valente, J.F.A.; Sousa, A.; Pedro, A.Q.; Pereira, P.; Sousa, F.; Queiroz, J.A. (2019). Effect of Chromatographic Conditions on Supercoiled Plasmid DNA Stability and Bioactivity, Applied Sciences, vol. 9(23): 5170, MDPI.
- Saba Abdulghani; Geoffrey Mitchell (2019). Biomaterials for In Situ Tissue Regeneration: A Review, Biomolecules, vol. 9(11): 750, MDPI.
- J. P. Fatelo and N. Martins-Ferreira (2019). Mobi algebra as an abstraction to the unit interval and its comparison to rings, Communications in algebra, vol. 47(3): 1197-1214, Taylor&Francis.
- Audenaert, Emmanuel A.; Van Houcke, Jan; Almeida, Diogo F.; Paelinck, Lena; Peiffer, M.; Steenackers, Gunther; Vandermeulen, Dirk (2019). Cascaded statistical shape model based segmentation of the full lower limb in CT, Computer Methods in Biomechanics and Biomedical Engineering, vol. 22(6): 644-657, Taylor&Francis.
- A. P. G. Castro; R. B. Ruben; S. B. Gonçalves; J. Pinheiro; J. M. Guedes; P. R. Fernandes (2019). Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering, Computer Methods in Biomechanics and Biomedical Engineering, vol. 22(6): 567-573, Taylor&Francis.
- Van Houcke, Jan; Galibarov, Pavel E.; Van Acker, Gilles; Fauconnier, Sigrid; Allaert, Ellen; Van Hoof, Tom; Almeida, Diogo F.; Steenackers, Gunther; Pattyn, Christophe; Audenaert, Emmanuel A. (2019). Personalized hip joint kinetics during deep squatting in young, athletic adults, Computer Methods in Biomechanics and Biomedical Engineering, vol. 23(1): 23-21, Taylor&Francis.
- Aliaksandr Bakatovich; Florindo Gaspar (2019). Composite material for thermal insulation based on moss raw material, Construction and Building Materials, vol. 228, 116699, Elsevier.
- Morouço, P.G., Gil, J.F. (2019). Four-Dimensional Bioprinting for Regenerative Medicine: Mechanisms to Induce Shape Variation and Potential Applications, EMJ Innov., vol. 3(1): 36-43.
- Morouço, P., Fernandes, C., & Santos-Rocha, R. (2019). Osteoarthritis, Exercise and Tissue Engineering: a stimulating triad for health professionals, Journal of Aging Research, vol. 2019, Hindawi.
- Valente, J.F.A.; Sousa, A.; Queiroz, J.A.; Sousa, F. (2019). DoE to improve supercoiled p53-pDNA purification by O-phospho-l-tyrosine chromatography, Journal of Chromatography B, vol. 1105, 184-192, Elsevier.
- V Infante; JFA Madeira; Rui B Ruben; F Moleiro; Sofia Teixeira de Freitas (2019). Characterization and optimization of hybrid carbon–glass epoxy composites under combined loading, Journal of Composite Materials, vol. 53(18): 2593-2605, SAGE journals.
- Silva, Miguel Reis; Pereira, António M.; Alves, Nuno; Mateus, Gonçalo; Mateus, Artur; Malça, Cândida (2019). Development of an additive manufacturing system for the deposition of thermoplastics impregnated with carbon fibers, Journal of Manufacturing and Materials Processing, vol. 3(2): 35, MDPI.
- G. Miranda; S. Faria; F. Bartolomeu; E. Pinto; N. Alves; N. Peixinho; M. Gasik; F.S. Silva (2019). A study on the production of thin-walled Ti6Al4V parts by selective laser melting, Journal of Manufacturing Processes, vol. 39(): 346-355, Elsevier.
- T. Santos; Hennetier, L.; Costa, V.A.F.; Costa, L.C. (2019). Microwave versus conventional porcelain firing: Temperature measurement, Journal of Manufacturing Processes, vol. 41: 92-100, Elsevier.
- Abdulghani, S., Morouço, P.G. (2019). Biofabrication for osteochondral tissue regeneration: bioink printability requirements, Journal of Materials Science: Materials in Medicine, vol. 30: 20, Springer.
- Sofia Rita Fernandes; Mariana Pereira; Ricardo Salvador; Pedro Cavaleiro Miranda; Mamede de Carvalho (2019). Cervical trans-spinal direct current stimulation: a modelling-experimental approach, Journal of NeuroEngineering and Rehabilitation, vol. 16(1): 1-14, Springer.
- Clementino, M. M., Martins-Ferreira, N., & Montoli, A. (2019). On the categorical behaviour of preordered groups, Journal of Pure and Applied Algebra, vol. 223(10): 4226-4245, Elsevier.
- Bartolomeu, F., Buciumeanu, M., Costa, MM., Alves, N., Gasik, M., Silva, FS., Miranda, G. (2019). Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: a tribocorrosion study targeting orthopedic applications, Journal of the Mechanical Behavior of Biomedical Materials, vol. 89(): 54-64, Elsevier.
- Bartolomeu, F.; Fonseca, J.; Peixinho, N.; Alves, N.; Gasik, M.; Silva, F.S.; Miranda, G. (2019). Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants, Journal of the Mechanical Behavior of Biomedical Materials, vol. 99(): 104-117, Elsevier.
- M.M. Costa; F. Bartolomeu; N. Alves; F.S. Silva; G. Miranda (2019). Tribological behavior of bioactive multi-material structures targeting orthopedic applications, Journal of the Mechanical Behavior of Biomedical Materials, vol. 94: 193-200, Elsevier.
- M.M. Costa; R. Lima; F. Melo-Fonseca; F. Bartolomeu; N. Alves; A. Miranda; M. Gasik; F.S. Silva; N.A: Silva; G. Miranda (2019). Development of ß-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties, Materials Science and Engineering: C, vol. 98: 705-716, Elsevier.
- Patrício, T. M. F., Panseri, S., Montesi, M., Iafisco, M., Sandri, M., Tampieri, A., & Sprio, S. (2019). Superparamagnetic hybrid microspheres affecting osteoblasts behaviour, Materials Science and Engineering: C, vol. 96: 234-247, Elsevier.
- Ricardo Serôdio; Sónia L Schickert; Ana R Costa-Pinto; Dias, Juliana; Pedro L Granja; Fang Yang; Ana L Oliveira (2019). Ultrasound sonication prior to electrospinning tailors silk fibroin/PEO membranes for periodontal regeneration, Materials Science and Engineering: C, vol. 98: 969-981, Elsevier.
- Pattanashetti, Nandini A.; Biscaia, Sara; Moura, Carla; Mitchell, Geoffrey R.; Kariduraganavar, Mahadevappa Y. (2019). Development of novel 3D scaffolds using BioExtruder by the incorporation of silica into polycaprolactone matrix for bone tissue engineering, Materials Today Communications, vol. 21: 100651, Elsevier.
- Nolasco, P.; Coelho, P.V.; Coelho, C.; Angelo, D.F.; Dias, J.R.; Alves, N.M.; Maurício, A.; Pereira, M.F.C.; Matos, A.P.A.; Martins, R.C.; Carvalho, P.A. (2019). Mineralization of Sialoliths Investigated by Ex Vivo and In Vivo X-ray Computed Tomography, Microscopy and Microanalysis, vol. 25(1): 151-163, Microscopy Society of America.
- J.F.A. Valente; J.R. Dias; A. Sousa; N. Alves (2019). Composite Central Face Design—An Approach to Achieve Efficient Alginate Microcarriers, Polymers, vol. 11(12): 1949, MDPI.
- António M.H. Pereira; Miguel R. Silva; Mercedes A.G. Domingues; José C. Sá (2019). Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study, Quality Innovation Prosperity, vol. 23(3).
- Costa, M. M., Dantas, T. A., Bartolomeu, F., Alves, N., Silva, F. S., Miranda, G., & Toptan, F. (2019). Corrosion behaviour of PEEK or ß-TCP-impregnated Ti6Al4V SLM structures targeting biomedical applications, Transactions of Nonferrous Metals Society of China (English Edition), vol. 29(12): 2523-2533, Elsevier.
- F. Bartolomeu; M.M. Costa; J.R. Gomes; N. Alves; C.S. Abreu; F.S. Silva; G. Miranda (2019). Implant surface design for improved implant stability – A study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting, Tribology International, vol. 129: 272-282, Elsevier.
- F. Bartolomeu; C.S. Abreu; C.G. Moura; M.M. Costa; N. Alves; F.S. Silva; G. Miranda (2019). Ti6Al4V-PEEK multi-material structures – design, fabrication and tribological characterization focused on orthopedic implants, Tribology International, vol. 131: 672-678, Elsevier.
- Morais, N.; Cruz, J.; Marques, A. (2019). The Kinematic Chain of Arm Elevation Is Impaired in Patients with Chronic Obstructive Pulmonary Disease, Journal of Chronic Obstructive Pulmonary Disease, vol. 16(3-4): 240-245, Taylor&Francis.
- Morouço, P.; Fernandes, C.; Santos-Rocha, R. (2019). Osteoarthritis, Exercise, and Tissue Engineering: A Stimulating Triad for Health Professionals, Journal of Aging Research, vol. 2019, Hindawi.
- Amaro, N.M.; Morouço, P.G.; Marques, M.C.; Batalha, N.; Neiva, H.; Marinho, D.A. (2019). A systematic review on dry-land strength and conditioning training on swimming performance, Science and Sports, vol. 34(1): e1-e14, Elsevier.
- Tavares, Ó. M., Duarte, J. P., Werneck, A. O., Costa, D. C., Sousa-e-Silva, P., Martinho, D., & Coelho-e-Silva, M. J. (2019). Body composition, strength static and isokinetic, and bone health: comparative study between active adults and amateur soccer players, Einstein (São Paulo), 17(3): eAO4419.
- Ruiz-Navarro, Jesús J.; Morouço, Pedro G.; Arellano, Raúl (2019). Relationship Between Tethered Swimming in a Flume and Swimming Performance, International Journal of Sports Physiology and Performance, vol. 1(8): 1087-1094, Human Kinetics.
2018
- Melo-Fonseca, F., Lima, R., Costa, MM., Bartolomeu, F., Alves, N., Miranda, A., Gasik, M., Silva, FS., Miranda, G. (2018). 45S5 BAG-Ti6Al4V structures: The influence of the design on some of the physical and chemical interactions that drive cellular response, Materials & Design 160, 95-105.
- Bartolomeu, F., Costa, MM., Gomes, JR., Alves, N., Abreu, CS., Silva, FS, Miranda, G. (2018). Implant surface design for improved implant stability–A study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting, Tribology International, 129: 272-282.
- Augusto, A., Dias, J. R., Campos, M. J., Alves, N. M., Pedrosa, R., & Silva, S. F. (2018). Influence of Codium tomentosum Extract in the Properties of Alginate and Chitosan Edible Films, Foods 2018, 7(4), 53.
- Ângelo DF, Morouço P, Monje Gil F, Mónico L, González-Gárcia R, Sousa R, Neto L, Caldeira I, Smith M, Smith S, Sanz D, Abade Dos Santos F, Pinho M, Carrapiço B, Cavaco S, Moura C, Alves N, Salvado F, Little C, (2018). Preclinical Randomized Controlled Trial of Bilateral Discectomy versus Bilateral Discopexy in Black Merino Sheep temporomandibular Joint: TEMPOJIMS Phase 1 – Histologic, Imaging and Body Weight results, Journal of Cranio-Maxillofacial Surgery 46 (4), 688-696.
- M. Buciumeanu, S. Almeida, F. Bartolomeu, MM Costa, N. Alves, FS Silva and G. Miranda (2018). Ti6Al4V cellular structures impregnated with biomedical PEEK-New material design for improved tribological behaviour, Tribology International 119, 157-164.
- Mitchell, G. R., & Olley, R. H. (2018). Orthogonal Templating Control of the Crystallisation of Poly(ε-Caprolactone), Polymers 2018, 10(3), 300.
- Zhong, J., Mohan, S. D., Bell, A., Terry, A., Mitchell, G. R., & Davis, F. J. (2018). Electrospinning of food-grade nanofibres from whey protein, International Journal of Biological Macromolecules, 113(1): 764-773.
- Mahendra, V., Kariduraganavar, M. Y., Pattanashetti, N. A., & Geoffrey, R. M. (2018). The Coconut Tree – A Source of Sustainable Polymeric Materials, United Journal of Biochemistry and Biotechnology, 1 (1): 1-6.
- Auriemma, F., De Rosa, C., Di Girolamo, R., Malafronte, A., Scoti, M., Mitchell, G. R., & Esposito, S. (2018). Time-resolving study of stress-induced Transformaations of Isotactic Polypropylene through Wide-Angle X-Ray Scattering Measurements, Polymers 2018, 10(2), 162.
- Geoffrey R Mitchell, Vidhura Mahendra, Dora Sousa (2018). Biopolymers Based on Rosin, Current Research in Biopolymers 1(1), CRBP-102. DOI: 10.29011/CRBP-102. 000002.
- Miragoli, M., Ceriotti, P., Iafisco, M., Vacchiano, M., Salvarani, N., Alogna, A., Carullo P., Ramirez-Rodríguez G. B., Patrício T., Degli Esposti L., Rossi F., Ravanetti F., Pinelli S., Alinovi R., Erreni M., Rossi S., Condorelli G., Post H., Tampieri A., Catalucci D. (2018). Inhalation of peptide-loaded nanoparticles improves heart failure, Science Translational Medicine, 10 (424), eaan6205.
- Patrício T.M.F., Panseri S., Montesi M., Iafisco M., Sandri M., Tampieri A., Sprio S. (2018). Superparamagnetic hybrid microspheres affecting osteoblasts behaviour, Materials Science and Engineering: C, 96: 234-247.
- Verónica Schiariti, Egmar Longo, Alexander Shoshmin, Ludmila Kozhushko, Yanina Besstrashnova, Maria Król, Taynah Neri Correia Campos, Haryelle Náryma Confessor Ferreira, Cláudia Veríssimo, Daniel Shaba, Matilda Mwale and Sandra Amado (2018). Implementation of the International Classification of Functioning, Disability, and Health (ICF) Core Sets for Children and Youth with Cerebral Palsy: Global Initiatives Promoting Optimal Functioning, International journal of environmental research and public health, 5(9): 1899.
- J. F. Horta, F. J. P. Simões, A. Mateus (2018). Large scale additive manufacturing of eco-composites, Int J Mater Form 11, 375–380.
- Gray, J. R. A., & Martins-Ferreira, N. (2018). New exactness conditions involving split cubes in protomodular categories, Theory and Applications of Categories, 33(33): 1031-1058.
- Martins-Ferreira, N., Montoli, A., Sobral, M. (2018). The Nine Lemma and the push forward construction for special Schreier extensions of monoids with operations, Semigroup Forum 97: 325–352.
- Bakatovich, A., Davydenko, N., Gaspar, F. (2018). Thermal insulating plates produced on the basis of vegetable agricultural waste, Energy & Buildings 180 (1): 72-82.
- Pereira, R. F., Sousa, A., Barrias, C. C., Bártolo, P. J., & Granja, P. L. (2018). A single-component hydrogel bioink for bioprinting of bioengineered 3D constructs for dermal tissue engineering, Mater. Horiz., 5: 1100-1111.
- JR Dias, S Baptista-Silva, A Sousa, AL Oliveira, PJ Bártolo, PL Granja (2018). Biomechanical performance of hybrid electrospun structures for skin regeneration, Materials Science and Engineering: C, 93: 816-827.
- Adérito Araújo, Sílvia Barbeiro and Maryam Khaksar Ghalati (2018). Convergence of an explicit iterative leap-frog discontinuous Galerkin method for time-domain Maxwell’s equations in anisotropic materials, J. Math. Industry 8, 9.
- C. Malça, C. Santos, M. Sena, A. Mateus (2018). Development of SLM cellular structures for injection molds manufacturing, Science and Technology of Materials 30(1): 13-22.
- Gaspar, F., Cruz, H., & Gomes, A. (2018). Evaluation of glue line shear strength of laminated timber structures using block and core type specimens, Eur. J. Wood Prod. 76: 413–425.
- Valente J.F.A., Sousa A., Queiroz J.A., Sousa F (2018). DoE to improve supercoiled p53-pDNA purification by O-phospho-L-tyrosine affinity chromatography, Journal of Chromatography B, 1105: 184-192.
- Valente J.F.A., Sousa A., Gaspar V.M., Queiroz J.A., Sousa F (2018). The biological performance of purified supercoiled p53 plasmid DNA in different cancer cell lines, Process Biochemistry, 75: 240-249.
- Valente J.F.A., J.A. Queiroz and Sousa F (2018). p53 as the focus of gene therapy: past, present and future. Current drug targets, 19 (15): 2018.
- Pereira, R.F., Barrias, C.C., Bártolo, P.J., Granja, P.L. (2018). Cell-instructive pectin hydrogels crosslinked via thiol-norbornene photo-click chemistry for skin tissue engineering, Acta Biomaterialia, 66: 282-293.
- Pedro G. Morouço, Tiago M. Barbosa, Raul Arellano and João P. Vilas-Boas (2018). Intracyclic Variation of Force and Swimming Performance, International Journal of Sports Physiology and Performance, 13 (7): 897–902.
- P Forte, DA Marinho, JE Morais, PG Morouço, TM Barbosa (2018). Estimation of mechanical power and energy cost in elite wheelchair racing by analytical procedures and numerical simulations, Computer Methods in Biomechanics and Biomedical Engineering, 21 (10): 585-592.
- P Forte, DA Marinho, JE Morais, PG Morouço, TM Barbosa (2018). The variations on the aerodynamics of a world-ranked wheelchair sprinter in the key-moments of the stroke cycle: A numerical simulation analysis, PloS one 13 (2), e0193658.
- Morais, N., Greten, H. J., Santos, M. J., & Machado, J. P. (2018). Immediate effects of acupuncture on the mechanosensitivity of the median nerve: an exploratory randomised trial. Acupuncture in Medicine, 36, 132–138.
- Geoffrey Potjewyd, Samuel Moxon, Tao Wang, Marco Domingos, Nigel M. Hooper (2018). Tissue Engineering 3D Neurovascular Units: A Biomaterials and Bioprinting Perspective, Trends in Biotechnology, 36 (4): 457-472.
- Vitor Ferreira, Ana Lisboa (2018). Innovation and Entrepreneurship: From Schumpeter to Industry 4.0, Applied Mechanics and Materials 890: 174-180.
- DF Angelo, F Monje, R Gonzalez, P Morouco, N Alves, F Salvado (2018). Black Merino Sheep: suitable animal model for temporomandibular joint interposal material research, Annals of Medicine 50: S87-S88.
- Jorge Silva-Leon, Andre Cioncolini, Antonio Filippone, Marco Domingos (2018). Flow-induced motions of flexible filaments hanging in cross-flow, Experimental Thermal and Fluid Science 97: 254-269.
National
2021
- Conceição, P.R., Franco, M., Alves, N., Portugal, J. and Neves, C.B. (2021). Fit accuracy of removable partial denture metal frameworks produced by CAD-CAM – a clinical study, Sociedade Portuguesa de Estomatologia e Medicina Dentária, vol. 64(4), 194-200.
2020
- Paula Pascoal-Faria (2020). Quando a Matemática é Rainha!, Gazeta da Sociedade Portuguesa de Matemática, nº 191, 51.
2019
- Silva, D.P., Silva, R.J.G., Mateus, G.N.S., Mateus, A.J.S., Carreira, P.J.S., Santos, C. (2019). Uma Solução Híbrida Integrada de Elevado Nível Criptográfico para Autenticação de Produtos, O Molde, vol. 105: 63-65.
2018
- Teresa Cardoso, Teresa Coimbra, Artur Mateus (2018). Análise matemática e realidade aumentada: um estudo no ensino superior em Portugal, Revista Debates em Educação, 10(22).
- F Ramalho, S Franco, F Maia, P Morouço (2018). Proposta de programa de exercício aquático para indivíduos com osteoartrose, Motricidade 14 (2): 140-141.