MANUFACTURING TECHNOLOGY LABORATORY

Human Bust and Car Key

These models are produced by first doing a slicing of the part on a software. There is 5 projectores that project UV radiation on the photopolymeric resin, only in the area of each layer succesively. The bust that presents more details is formed by 800 layers of 0,05mm, each one with 9 second of incident light, diatance of projection of 175mm and temperature around 18ºC.The more layers and the longer the projection time on each one, better are the results and the details definition.

Laboratory: Manufacturing Technology Lab

Equipment: NextParts prototype of “Photocentric 3D Printing”

Material: UV DLP Photopolymer

Project: NextParts

Consortium: INEGI | 3DTech | UC | CDRSP